مدیریت نظرات ارائه در C++
مرور کلی
این مقاله توضیح میدهد چگونه نظرات ارائه را با Aspose.Slides برای C++ مدیریت کنیم. انواع اصلی مرتبط با نظر معرفی میشوند و نحوه افزودن نظرات به اسلایدها، دسترسی به نظرات موجود، کار با پاسخها و نظرات مدرن، و حذف نظرات از یک ارائه نشان داده میشود.
مثالها سناریوهای رایج بازبینی و همکاری در PowerPoint را پوشش میدهند، مانند اختصاص نظرات به نویسندگان، خواندن متن نظر و دادههای متا، ساخت زنجیره پاسخها، و حذف نظرات انتخابشده یا تمام نظرات.
در PowerPoint، نظرات بهعنوان حاشیهنویسی روی اسلایدها ظاهر میشوند. انتخاب یک نظر متن آن و بحث مرتبط را نمایش میدهد.
برای درخواست نمایش یا پنهانکردن نظرات هنگام باز کردن یک ارائه بدون تغییر در خود نظرات، به نمایش یا مخفیسازی نظرات هنگام باز کردن یک ارائه مراجعه کنید.
چرا نظرات را به ارائهها اضافه کنیم؟
میتوانید از نظرات برای ارائه بازخورد و همکاری با همکاران هنگام مرور ارائهها استفاده کنید.
Aspose.Slides برای C++ APIهای زیر را برای کار با نظرات فراهم میکند:
- کلاس Presentation که دسترسی به نویسندگان نظرات ارائه را فراهم میکند.
- رابط ICommentCollection که نظرات مربوط به یک نویسنده فردی را نشان میدهد.
- رابط IComment که اطلاعاتی درباره یک نظر، از جمله نویسنده، زمان ایجاد، موقعیت و متن را فراهم میکند.
- کلاس CommentAuthor که اطلاعاتی درباره یک نویسنده، شامل نام، ناممستعار و نظرات مرتبط را ارائه میدهد.
افزودن نظرات به اسلاید
این مثال دو اسلاید ایجاد میکند و یک نویسنده نظر را با AddAuthor ثبت میکند. سپس با استفاده از AddComment یک نظر روی هر اسلاید قرار میدهد، سپس نظرات اولین اسلاید را برای آن نویسنده با GetSlideComments بازیابی میکند. کنسول متن اولین نظر را دو بار نمایش میدهد، که دسترسی از طریق اسلاید و نویسنده هر دو نشان داده میشود، و ارائه ذخیرهشده شامل هر دو نظر است.
#include <DOM/IComment.h>
#include <DOM/ICommentAuthor.h>
#include <DOM/ICommentAuthorCollection.h>
#include <DOM/ICommentCollection.h>
#include <DOM/ISlide.h>
#include <DOM/ISlideCollection.h>
#include <DOM/Presentation.h>
#include <Export/SaveFormat.h>
#include <drawing/point_f.h>
#include <system/console.h>
#include <system/date_time.h>
using namespace Aspose::Slides;
using namespace Aspose::Slides::Export;
using namespace System;
using namespace System::Drawing;
auto presentation = MakeObject<Presentation>();
auto firstSlide = presentation->get_Slide(0);
auto secondSlide = presentation->get_Slides()->AddEmptySlide(presentation->get_LayoutSlide(0));
auto author = presentation->get_CommentAuthors()->AddAuthor(u"Jawad", u"MF");
auto position = PointF(0.2f, 0.2f);
auto createdTime = DateTime::get_Now();
author->get_Comments()->AddComment(u"Hello Jawad, this is a slide comment", firstSlide, position, createdTime);
author->get_Comments()->AddComment(u"Hello Jawad, this is the second slide comment", secondSlide, position, createdTime);
auto comments = firstSlide->GetSlideComments(author);
if (comments->get_Length() > 0)
{
auto firstComment = comments[0];
Console::WriteLine(firstComment->get_Text());
auto commentText = firstComment->get_Author()->get_Comments()->idx_get(0)->get_Text();
Console::WriteLine(commentText);
}
presentation->Save(u"Comments_out.pptx", SaveFormat::Pptx);
یافتن یا ایجاد نویسنده نظر
هنگامی که یک بازبینی خودکار بهطور مکرر همان ارائه را پردازش میکند، قبل از افزودن نویسنده، مجموعهای که توسط get_CommentAuthors برگردانده میشود را جستجو کنید. FindByNameAndInitials هم نام و هم ناممستعار را مطابقت میدهد و آرایهای از نویسندگان منطبق را بر میگرداند، یا آرایه خالی اگر مطابقتی وجود نداشته باشد. در مقابل، FindByName تنها بر اساس نام جستجو میکند، بدون در نظر گرفتن ناممستعار. صدا زدن AddAuthor با نام و ناممستعاری که قبلاً در مجموعه وجود دارد، استثنا پرتاب میکند.
این مثال به یک فایل ارائه با حداقل یک اسلاید نیاز دارد. در هر دو عبور، نویسنده منطبق اولین بار را مجدداً استفاده میکند، یا فقط وقتی نتیجه خالی باشد، یکی را ایجاد میکند. اگر چندین مطابقت وجود داشته باشد، عنصر اول آرایه را بدون ترکیب یا حذف نویسندگان دیگر انتخاب میکند. سپس برای نویسنده منتخب با AddComment فراخوانی میکند و ارائه را ذخیره میکند. عبور دوم خروجی عبور اول را باز میکند و عملیات را تکرار میکند.
#include <DOM/ICommentAuthor.h>
#include <DOM/ICommentAuthorCollection.h>
#include <DOM/ICommentCollection.h>
#include <DOM/ISlide.h>
#include <DOM/Presentation.h>
#include <Export/SaveFormat.h>
#include <drawing/point_f.h>
#include <system/date_time.h>
#include <system/string.h>
using namespace Aspose::Slides;
using namespace Aspose::Slides::Export;
using namespace System;
using namespace System::Drawing;
const String authorName = u"Reviewer";
const String authorInitials = u"RV";
auto inputFile = String(u"input.pptx");
auto position = PointF(20.0f, 20.0f);
for (auto pass = 1; pass <= 2; pass++)
{
auto presentation = MakeObject<Presentation>(inputFile);
auto matches = presentation->get_CommentAuthors()->FindByNameAndInitials(authorName, authorInitials);
auto author = matches->get_Length() > 0 ? matches[0] : presentation->get_CommentAuthors()->AddAuthor(authorName, authorInitials);
author->get_Comments()->AddComment(u"Please review this slide.", presentation->get_Slide(0), position, DateTime::get_Now());
auto outputFile = String::Format(u"review_pass_{0}.pptx", pass);
presentation->Save(outputFile, SaveFormat::Pptx);
inputFile = outputFile;
}
عبور دوم نظر دیگری اضافه میکند بدون افزودن نویسنده دیگر یا حذف نظرات موجود. فایل نهایی، review_pass_2.pptx، هر دو نظر جدید را همراه با هر نظر اصلی موجود شامل میشود. استفاده مجدد از یک نویسنده نظرات را تکراری نمیکند: برای جلوگیری از افزودن مکرر همان نظر، قبل از افزودن، تشخیص تکراری جداگانهای پیادهسازی کنید.
دسترسی به نظرات اسلاید
این مثال یک ارائه موجود را باز میکند و مجموعهای که توسط get_CommentAuthors برگردانده میشود را میخواند. برای هر نویسنده، مجموعهای که توسط get_Comments برگردانده میشود را پیمایش میکند و شماره اسلاید، متن نظر، نام نویسنده و زمان ایجاد را چاپ میکند. ارائه ورودی باید حاوی نظرات باشد تا خروجی کنسول تولید شود.
#include <DOM/IComment.h>
#include <DOM/ICommentAuthor.h>
#include <DOM/ICommentAuthorCollection.h>
#include <DOM/ICommentCollection.h>
#include <DOM/ISlide.h>
#include <DOM/Presentation.h>
#include <system/console.h>
using namespace Aspose::Slides;
using namespace System;
auto presentation = MakeObject<Presentation>(u"Comments1.pptx");
for (auto&& author : presentation->get_CommentAuthors())
{
for (auto&& comment : author->get_Comments())
{
Console::WriteLine(u"Slide: {0}", comment->get_Slide()->get_SlideNumber());
Console::WriteLine(u"Comment: {0}", comment->get_Text());
Console::WriteLine(u"Author: {0}", comment->get_Author()->get_Name());
Console::WriteLine(u"Posted at: {0}", comment->get_CreatedTime());
Console::WriteLine();
}
}
پاسخ به نظرات
یک نظر والد، نظر اصلی در بالای یک سلسلهمراتب پاسخها است. متدهای get_ParentComment و set_ParentComment از رابط IComment به شما امکان میدهند والد یک نظر را دریافت یا تنظیم کنید.
این مثال نظراتی از دو نویسنده ایجاد میکند و با استفاده از set_ParentComment برای ساخت پاسخها، از جمله پاسخی به پاسخ دیگر، استفاده میکند. ارسال nullptr به GetSlideComments نظرات را از همه نویسندگان بازیابی میکند؛ کنسول هر ورودی را بر اساس عمق آن در سلسلهمراتب پاسخها تورفتگی میزند. مثال بحث کامل را ذخیره میکند، بر روی اولین نظر ریشهای متد Remove را صدا میزند، و یک ارائه دوم را با حذف آن نظر و پاسخهایش ذخیره میکند.
#include <DOM/IComment.h>
#include <DOM/ICommentAuthor.h>
#include <DOM/ICommentAuthorCollection.h>
#include <DOM/ICommentCollection.h>
#include <DOM/ISlide.h>
#include <DOM/Presentation.h>
#include <Export/SaveFormat.h>
#include <drawing/point_f.h>
#include <system/console.h>
#include <system/date_time.h>
using namespace Aspose::Slides;
using namespace Aspose::Slides::Export;
using namespace System;
using namespace System::Drawing;
auto presentation = MakeObject<Presentation>();
auto slide = presentation->get_Slide(0);
auto position = PointF(10.0f, 10.0f);
auto createdTime = DateTime::get_Now();
auto originalAuthor = presentation->get_CommentAuthors()->AddAuthor(u"Author_1", u"A.A.");
auto rootComment = originalAuthor->get_Comments()->AddComment(u"comment 1", slide, position, createdTime);
auto reviewer = presentation->get_CommentAuthors()->AddAuthor(u"Author_2", u"B.B.");
auto firstReply = reviewer->get_Comments()->AddComment(u"reply 1 for comment 1", slide, position, createdTime);
firstReply->set_ParentComment(rootComment);
auto secondReply = reviewer->get_Comments()->AddComment(u"reply 2 for comment 1", slide, position, createdTime);
secondReply->set_ParentComment(rootComment);
auto subReply = originalAuthor->get_Comments()->AddComment(u"subreply 3 for reply 2", slide, position, createdTime);
subReply->set_ParentComment(secondReply);
reviewer->get_Comments()->AddComment(u"comment 2", slide, position, createdTime);
auto separateComment = reviewer->get_Comments()->AddComment(u"comment 3", slide, position, createdTime);
auto separateReply = originalAuthor->get_Comments()->AddComment(u"reply 4 for comment 3", slide, position, createdTime);
separateReply->set_ParentComment(separateComment);
auto comments = slide->GetSlideComments(nullptr);
for (auto i = 0; i < comments->get_Length(); i++)
{
auto comment = comments[i];
while (comment->get_ParentComment() != nullptr)
{
Console::Write(u"\t");
comment = comment->get_ParentComment();
}
Console::WriteLine(u"{0}: {1}", comments[i]->get_Author()->get_Name(), comments[i]->get_Text());
}
presentation->Save(u"parent_comment.pptx", SaveFormat::Pptx);
rootComment->Remove();
presentation->Save(u"remove_comment.pptx", SaveFormat::Pptx);
Warning
- هنگام استفاده از متد Remove رابط IComment برای حذف یک نظر، همه پاسخهای آن نظر نیز حذف میشوند.
- اگر متد set_ParentComment یک ارجاع حلقهای ایجاد کند، یک PptxEditException پرتاب میشود.
افزودن نظرات مدرن
نظرات مدرن میتوانند به خود اسلاید، به یک شکل خاص، یا به یک بازه متنی داخل یک AutoShape مرتبط شوند. متد ICommentCollection::AddModernComment علاوه بر اسلاید و مختصات علامتگذار نظر، یک آرگومان IShape میپذیرد.
زمانی که nullptr برای آرگومان شکل ارسال میشود، نظر یک نظر سطح اسلاید است. علامتگذار آن توسط مختصات ارائهشده موقعیت یابد، اما به شکل خاصی مرتبط نیست، بنابراین IModernComment::get_Shape nullptr برمیگرداند. وقتی یک IShape فراهم شود، نظر به آن شکل متصل میشود. مختصات همچنان موقعیت علامتگذار نظر را روی اسلاید تعریف میکند، در حالی که ارتباط شکل میتواند از طریق IModernComment::get_Shape بازیابی شود.
اتصال یک نظر مدرن به یک شکل
مثال دو بار AddModernComment را فراخوانی میکند: یک بار با شکل nullptr برای یک نظر سطح اسلاید و یک بار با یک مستطیل به عنوان لنگر. فراخوانی get_Shape برای نظر سطح اسلاید True را برای بررسی null چاپ میکند و برای نظر لنگر شده Revenue title را چاپ میکند. هر دو نظر با ارائه ذخیره میشوند.
#include <DOM/IAutoShape.h>
#include <DOM/ICommentAuthor.h>
#include <DOM/ICommentAuthorCollection.h>
#include <DOM/ICommentCollection.h>
#include <DOM/IModernComment.h>
#include <DOM/IShape.h>
#include <DOM/IShapeCollection.h>
#include <DOM/ISlide.h>
#include <DOM/ITextFrame.h>
#include <DOM/Presentation.h>
#include <DOM/ShapeType.h>
#include <Export/SaveFormat.h>
#include <drawing/point_f.h>
#include <system/console.h>
#include <system/date_time.h>
using namespace Aspose::Slides;
using namespace Aspose::Slides::Export;
using namespace System;
using namespace System::Drawing;
auto presentation = MakeObject<Presentation>();
auto slide = presentation->get_Slide(0);
auto author = presentation->get_CommentAuthors()->AddAuthor(u"Reviewer", u"RV");
auto shape = slide->get_Shapes()->AddAutoShape(ShapeType::Rectangle, 50.0f, 50.0f, 300.0f, 80.0f);
shape->set_Name(u"Revenue title");
shape->get_TextFrame()->set_Text(u"Quarterly revenue");
auto createdTime = DateTime::get_Now();
auto slideCommentPosition = PointF(20.0f, 20.0f);
auto shapeCommentPosition = PointF(60.0f, 60.0f);
auto slideComment = author->get_Comments()->AddModernComment(u"Review the overall slide layout.", slide, nullptr, slideCommentPosition, createdTime);
auto shapeComment = author->get_Comments()->AddModernComment(u"Check this title.", slide, shape, shapeCommentPosition, createdTime);
Console::WriteLine(slideComment->get_Shape() == nullptr);
auto shapeAnchor = shapeComment->get_Shape();
if (shapeAnchor != nullptr)
{
Console::WriteLine(shapeAnchor->get_Name());
}
presentation->Save(u"modern_comments.pptx", SaveFormat::Pptx);
اتصال نظرات به انواع مختلف شکل
هر شیء اسلایدی که رابط IShape را پیادهسازی کند میتواند به عنوان لنگر شکل استفاده شود. مثالهای رایج شامل IAutoShape، IPictureFrame، IGroupShape، IConnector، و نمونههای IGraphicalObject مانند نمودارها هستند.
مثال از AddModernComment برای ارتباط یک نظر با هر یک از پنج نوع شکل استفاده میکند: یک AutoShape، یک قاب تصویر، یک گروه، یک اتصالدهنده و یک نمودار. تصویر از دادههای تصویر جاسازیشده استفاده میکند، بنابراین نیازی به تصویر خارجی نیست. هر نظر موقعیت علامتگذار خود را دارد و ارائه ذخیرهشده تمام پنج ارتباط شکل را حفظ میکند.
#include <DOM/Chart/ChartType.h>
#include <DOM/IChart.h>
#include <DOM/IAutoShape.h>
#include <DOM/ICommentAuthor.h>
#include <DOM/ICommentAuthorCollection.h>
#include <DOM/ICommentCollection.h>
#include <DOM/IConnector.h>
#include <DOM/IGroupShape.h>
#include <DOM/IImageCollection.h>
#include <DOM/IPictureFrame.h>
#include <DOM/IPPImage.h>
#include <DOM/IShapeCollection.h>
#include <DOM/ISlide.h>
#include <DOM/ITextFrame.h>
#include <DOM/Presentation.h>
#include <DOM/ShapeType.h>
#include <Export/SaveFormat.h>
#include <drawing/point_f.h>
#include <system/convert.h>
#include <system/date_time.h>
using namespace Aspose::Slides;
using namespace Aspose::Slides::Charts;
using namespace Aspose::Slides::Export;
using namespace System;
using namespace System::Drawing;
auto presentation = MakeObject<Presentation>();
auto slide = presentation->get_Slide(0);
auto author = presentation->get_CommentAuthors()->AddAuthor(u"Reviewer", u"RV");
auto createdTime = DateTime::get_Now();
auto autoShape = slide->get_Shapes()->AddAutoShape(ShapeType::Rectangle, 20.0f, 20.0f, 180.0f, 60.0f);
autoShape->get_TextFrame()->set_Text(u"AutoShape");
auto autoShapeCommentPosition = PointF(30.0f, 30.0f);
author->get_Comments()->AddModernComment(u"Comment on an AutoShape.", slide, autoShape, autoShapeCommentPosition, createdTime);
auto imageBase64 = u"iVBORw0KGgoAAAANSUhEUgAAAAIAAAACCAIAAAD91JpzAAAAFklEQVR4nGP8//8/AwMDEwMDAwMDAwAkBgMB/DXemwAAAABJRU5ErkJggg==";
auto imageData = Convert::FromBase64String(imageBase64);
auto image = presentation->get_Images()->AddImage(imageData);
auto pictureFrame = slide->get_Shapes()->AddPictureFrame(ShapeType::Rectangle, 220.0f, 20.0f, 120.0f, 80.0f, image);
auto pictureCommentPosition = PointF(230.0f, 30.0f);
author->get_Comments()->AddModernComment(u"Comment on a picture.", slide, pictureFrame, pictureCommentPosition, createdTime);
auto groupShape = slide->get_Shapes()->AddGroupShape();
groupShape->get_Shapes()->AddAutoShape(ShapeType::Rectangle, 0.0f, 0.0f, 80.0f, 40.0f);
groupShape->get_Shapes()->AddAutoShape(ShapeType::Ellipse, 100.0f, 0.0f, 80.0f, 40.0f);
auto groupCommentPosition = PointF(40.0f, 150.0f);
author->get_Comments()->AddModernComment(u"Comment on a group.", slide, groupShape, groupCommentPosition, createdTime);
auto connector = slide->get_Shapes()->AddConnector(ShapeType::StraightConnector1, 220.0f, 150.0f, 140.0f, 40.0f);
auto connectorCommentPosition = PointF(240.0f, 150.0f);
author->get_Comments()->AddModernComment(u"Comment on a connector.", slide, connector, connectorCommentPosition, createdTime);
auto chart = slide->get_Shapes()->AddChart(ChartType::ClusteredColumn, 400.0f, 20.0f, 250.0f, 180.0f);
auto chartCommentPosition = PointF(420.0f, 40.0f);
author->get_Comments()->AddModernComment(u"Comment on a graphical object.", slide, chart, chartCommentPosition, createdTime);
presentation->Save(u"modern_comment_shape_types.pptx", SaveFormat::Pptx);
اتصال یک نظر به متن و تنظیم وضعیت آن
برای یک نظر مدرن مرتبط با یک IAutoShape، متدهای IModernComment::get_TextSelectionStart و IModernComment::set_TextSelectionStart موقعیت شروع متن انتخابشده در فریم متنی شکل را کنترل میکنند. بهطور مشابه، IModernComment::get_TextSelectionLength و IModernComment::set_TextSelectionLength طول انتخاب را کنترل میکنند. این متدها همراه با هم نظر را به یک بازه متنی خاص داخل AutoShape پیوند میدهند.
متدهای IModernComment::get_Status و IModernComment::set_Status از مقدار enum ModernCommentStatus استفاده میکنند:
NotDefined— وضعیت خاصی برای نظر مدرن تعریف نشده است.Active— نظر فعال است.Resolved— نظر حل شده است.Closed— نظر بسته است.
مثال یک نظر مدرن را به کلمات «quarterly revenue» در متن یک مستطیل متصل میکند. شروع انتخاب صفر‑محور را از متن محاسبه کرده و به set_TextSelectionStart میفرستد و سپس با تعداد کاراکترهای انتخابشده set_TextSelectionLength را فراخوانی میکند. پس از صدا زدن set_Status با Resolved، ارائه را ذخیره و باز میکند. چهار بررسی کنسول باید هر کدام True چاپ کنند، که تأیید میکند لنگر شکل، بازه متن و وضعیت نگه داشته شدهاند.
#include <DOM/IAutoShape.h>
#include <DOM/IComment.h>
#include <DOM/ICommentAuthor.h>
#include <DOM/ICommentAuthorCollection.h>
#include <DOM/ICommentCollection.h>
#include <DOM/IModernComment.h>
#include <DOM/IShape.h>
#include <DOM/IShapeCollection.h>
#include <DOM/ISlide.h>
#include <DOM/ITextFrame.h>
#include <DOM/ModernCommentStatus.h>
#include <DOM/Presentation.h>
#include <DOM/ShapeType.h>
#include <Export/SaveFormat.h>
#include <drawing/point_f.h>
#include <system/console.h>
#include <system/date_time.h>
#include <system/object_ext.h>
#include <system/string.h>
using namespace Aspose::Slides;
using namespace Aspose::Slides::Export;
using namespace System;
using namespace System::Drawing;
const String outputFile = u"modern_comment_text_anchor.pptx";
const String shapeText = u"Review the quarterly revenue forecast.";
const String selectedText = u"quarterly revenue";
auto expectedSelectionStart = shapeText.IndexOf(selectedText);
auto presentation = MakeObject<Presentation>();
auto slide = presentation->get_Slide(0);
auto shape = slide->get_Shapes()->AddAutoShape(ShapeType::Rectangle, 50.0f, 50.0f, 400.0f, 100.0f);
shape->set_Name(u"Forecast text");
shape->get_TextFrame()->set_Text(shapeText);
auto author = presentation->get_CommentAuthors()->AddAuthor(u"Reviewer", u"RV");
auto commentPosition = PointF(60.0f, 60.0f);
auto comment = author->get_Comments()->AddModernComment(u"Verify this forecast wording.", slide, shape, commentPosition, DateTime::get_Now());
comment->set_TextSelectionStart(expectedSelectionStart);
comment->set_TextSelectionLength(selectedText.get_Length());
comment->set_Status(ModernCommentStatus::Resolved);
presentation->Save(outputFile, SaveFormat::Pptx);
auto reopenedPresentation = MakeObject<Presentation>(outputFile);
auto reopenedSlide = reopenedPresentation->get_Slide(0);
auto reopenedComments = reopenedSlide->GetSlideComments(nullptr);
for (auto&& reopenedComment : reopenedComments)
{
auto modernComment = AsCast<IModernComment>(reopenedComment);
if (modernComment == nullptr)
{
continue;
}
auto shapeAnchor = modernComment->get_Shape();
auto shapeMatches = shapeAnchor != nullptr && shapeAnchor->get_Name() == u"Forecast text";
auto selectionStartMatches = modernComment->get_TextSelectionStart() == expectedSelectionStart;
auto selectionLengthMatches = modernComment->get_TextSelectionLength() == selectedText.get_Length();
auto statusMatches = modernComment->get_Status() == ModernCommentStatus::Resolved;
Console::WriteLine(u"Shape anchor preserved: {0}", shapeMatches);
Console::WriteLine(u"Text selection start preserved: {0}", selectionStartMatches);
Console::WriteLine(u"Text selection length preserved: {0}", selectionLengthMatches);
Console::WriteLine(u"Resolved status preserved: {0}", statusMatches);
}
بازرسی نظرات مدرن موجود
این مثال به یک ارائه موجود حاوی نظرات مدرن نیاز دارد و متن، وضعیت و جزئیات لنگر آنها را چاپ میکند. برای بازرسی، بررسی کنید کدام نظرات رابط IModernComment را پیادهسازی کردهاند، سپس به IModernComment::get_Shape، IModernComment::get_TextSelectionStart، IModernComment::get_TextSelectionLength و IModernComment::get_Status نگاه کنید. یک شکل nullptr نشاندهنده یک نظر سطح اسلاید است. برای یک لنگر IAutoShape، متدهای انتخاب متن بازه مربوطه در فریم متنی شکل را شناسایی میکنند.
#include <DOM/IAutoShape.h>
#include <DOM/IComment.h>
#include <DOM/IModernComment.h>
#include <DOM/IShape.h>
#include <DOM/ISlide.h>
#include <DOM/ISlideCollection.h>
#include <DOM/ModernCommentStatus.h>
#include <DOM/Presentation.h>
#include <system/console.h>
#include <system/object_ext.h>
using namespace Aspose::Slides;
using namespace System;
auto presentation = MakeObject<Presentation>(u"comments.pptx");
for (auto&& slide : presentation->get_Slides())
{
auto comments = slide->GetSlideComments(nullptr);
for (auto&& comment : comments)
{
auto modernComment = AsCast<IModernComment>(comment);
if (modernComment == nullptr)
{
continue;
}
Console::WriteLine(u"Slide: {0}", slide->get_SlideNumber());
Console::WriteLine(u"Text: {0}", modernComment->get_Text());
Console::WriteLine(u"Status: {0}", modernComment->get_Status());
auto shape = modernComment->get_Shape();
if (shape == nullptr)
{
Console::WriteLine(u"Anchor: slide level");
}
else
{
Console::WriteLine(u"Anchor shape: {0}", shape->get_Name());
Console::WriteLine(u"Anchor type: {0}", shape->GetType().get_Name());
auto autoShape = AsCast<IAutoShape>(shape);
if (autoShape != nullptr)
{
Console::WriteLine(u"Text selection start: {0}", modernComment->get_TextSelectionStart());
Console::WriteLine(u"Text selection length: {0}", modernComment->get_TextSelectionLength());
}
}
Console::WriteLine();
}
}
حذف نظرات
Aspose.Slides برای C++ به شما امکان میدهد تمام نظرات و نویسندگان آنها را از یک ارائه حذف کنید یا نظرات انتخابشده را حذف کنید در حالی که بقیه نگه داشته میشوند. مثالهای زیر هر دو رویکرد را نشان میدهند و ارائه بهروزرسانیشده را ذخیره میکنند.
حذف تمام نظرات و نویسندگان نظرات
مثال یک ارائه موجود را باز میکند و برای هر نویسنده متد ICommentCollection::Clear را صدا میزند، سپس متد ICommentAuthorCollection::Clear را برای حذف خود نویسندگان فراخوانی میکند. ارائه ذخیرهشده نه نظرات و نه نویسندگان نظرات را دارد. برای مشاهده حذف، از یک ارائه حاوی نظرات استفاده کنید.
#include <DOM/ICommentAuthor.h>
#include <DOM/ICommentAuthorCollection.h>
#include <DOM/ICommentCollection.h>
#include <DOM/Presentation.h>
#include <Export/SaveFormat.h>
using namespace Aspose::Slides;
using namespace Aspose::Slides::Export;
using namespace System;
auto presentation = MakeObject<Presentation>(u"example.pptx");
for (auto&& author : presentation->get_CommentAuthors())
{
author->get_Comments()->Clear();
}
presentation->get_CommentAuthors()->Clear();
presentation->Save(u"example_out.pptx", SaveFormat::Pptx);
حذف نظرات خاص
مثال دو نظر روی یک اسلاید ایجاد میکند و از GetSlideComments برای یافتن نظرات هر نویسنده استفاده میکند. قبل از صدا زدن ICommentCollection::Remove، نظراتی که متن آنها برابر با «comment 1» است جمعآوری میکند تا از تغییر مجموعه هنگام انتخاب جلوگیری شود. ارائه ذخیرهشده فقط «comment 2» را نگه میدارد.
#include <DOM/IComment.h>
#include <DOM/ICommentAuthor.h>
#include <DOM/ICommentAuthorCollection.h>
#include <DOM/ICommentCollection.h>
#include <DOM/ISlide.h>
#include <DOM/Presentation.h>
#include <Export/SaveFormat.h>
#include <drawing/point_f.h>
#include <system/collections/list.h>
#include <system/date_time.h>
using namespace Aspose::Slides;
using namespace Aspose::Slides::Export;
using namespace System;
using namespace System::Collections::Generic;
using namespace System::Drawing;
auto presentation = MakeObject<Presentation>();
auto slide = presentation->get_Slide(0);
auto author = presentation->get_CommentAuthors()->AddAuthor(u"Author", u"A");
auto createdTime = DateTime::get_Now();
auto firstCommentPosition = PointF(0.2f, 0.2f);
auto secondCommentPosition = PointF(0.3f, 0.2f);
author->get_Comments()->AddComment(u"comment 1", slide, firstCommentPosition, createdTime);
author->get_Comments()->AddComment(u"comment 2", slide, secondCommentPosition, createdTime);
for (auto&& commentAuthor : presentation->get_CommentAuthors())
{
auto commentsToRemove = MakeObject<List<SharedPtr<IComment>>>();
auto comments = slide->GetSlideComments(commentAuthor);
for (auto&& comment : comments)
{
if (comment->get_Text() == u"comment 1")
{
commentsToRemove->Add(comment);
}
}
for (auto&& comment : commentsToRemove)
{
commentAuthor->get_Comments()->Remove(comment);
}
}
presentation->Save(u"pres.pptx", SaveFormat::Pptx);
سوالات متداول
آیا Aspose.Slides از وضعیت حلشده برای نظرات مدرن پشتیبانی میکند؟
بله. متدهای IModernComment::get_Status و IModernComment::set_Status از مقدار enum ModernCommentStatus استفاده میکنند، شامل Resolved. وضعیت در ارائه ذخیره میشود و پس از بازگشایی مجدد فایل میتوان آن را دوباره خواند.
آیا بحثهای رشتهای (زنجیره پاسخها) پشتیبانی میشوند و آیا محدودیتی برای تو در تویی وجود دارد؟
بله. هر نظر میتواند به parent comment خود ارجاع دهد و زنجیره پاسخها را فعال میکند. API محدودیت عمق خاصی برای تو در تویی تعریف نمیکند.
موقعیت علامتگذار یک نظر در اسلاید بر اساس چه سیستم مختصاتی تعریف میشود؟
موقعیت علامتگذار با مختصات شناور (floating‑point) در سیستم مختصات اسلاید تعریف میشود، که امکان قرار دادن دقیق آن بر روی اسلاید را میدهد.