Generate QR Code and Micro QR Code

Generate QR Code Online: You can test the quality of Aspose.BarCode generation for QR Codes and get the results online.

Overview

QR Code corresponds to a group of 2D square types that benefits from high data density and allows encoding streams of bytes and textual data composed of Unicode symbols. Aspose.BarCode for Python via .NET supports Extended Channel Interpretation (ECI) to encode Unicode data and provides various encoding modes; UTF8 is one of the most widely used encoding modes.

Reserving the minimum possible amount of data for error correction, the QR Code standard can be used to encode at most 7,089 numerical digits or 4,296 alphanumeric characters or 2,953 bytes. The other standard, Micro QR Code, allows encoding up to 35 numerical digits or 21 alphanumeric characters or 15 bytes. Micro QR Code serves to create considerably small QR Code images. However, it does not enable Extended Channel Interpretation (ECI) and does not allow encoding Unicode characters. In particular, Micro QR Code barcodes corresponding to the M1 version can encode at most five numerical digits; the M2 version allows encoding up to ten numerical or six alphanumeric characters. This encoding capacity is usually suitable to work with industrial markers.

The main advantages of the QR Code symbology can be outlined as follows:

large data density
the capability to perform scanning and reading even for severely distorted barcode images
the possibility of encoding streams of bytes
high scanning and decoding speed
the possibility to encode Unicode characters through ECI (not supported in Micro QR Code)
several error correction modes; the maximal error correction level H allows restoring up to 30% of encoded information

It should be noted that considerable damage to target patterns in QR Code images may result in the deterioration of barcode scanning and reading efficiency.

If you need any clarifications, feel free to reach out Aspose Technical Support: ask your questions at Aspose.Barcode Forum or contact Aspose Paid Support Helpdesk.

Generation Modes

Aspose.BarCode for Python via .NET allows generating QR Code or Micro QR Code images corresponding to different versions. This can done using two properties of class QrParameters, i.e. qr_encode_type (using values from the QREncodeType enum) and qr_version (with values from the QRVersion enum). By default, the AUTO setting is enabled.

The first way to set the required version of QR Code or Micro QR Code is to use the qr_version property. If data inputted for encoding does not occupy the entire capacity of the target version, padding characters are used to fill the leftover space. If barcode information exceeds the available capacity, barcode images cannot be generated, and the corresponding exception is thrown.

The second way to determine the desired QR Code generation mode is applicable when QrVersion remains set to AUTO. In this case, the qr_encode_type property can be used to select the barcode type according to the input data size. The QREncodeType enum can take the following values:

AUTO: firstly, the library aims to identify the most appropriate Micro QR Code version from M1 to M4. If no suitable version is found, the library iterates over supported QR Code versions from Version 01 to Version 40. If the data to be encoded does not fit the data capacity of Version 40, an exception is thrown.
FORCE_QR: the most appropriate QR Code version is automatically selected among options from Version 01 to Version 40.
FORCE_MICRO_QR: the library aims at selecting the most applicable Micro QR Code version from M1 to M4. If the input data exceeds the data capacity of the M4 version, an exception is thrown.

Automatic Version Setting

The following barcode images are given to explain how to create different types of QR Code using various automatic version setting modes.

Generation Mode	AUTO	FORCE_QR	FORCE_MICRO_QR

Manual Version Selection

In Aspose.BarCode for Python via .NET, developers can manually select the desired QR Code version for barcode generation. In this case, it is required to initialize the qr_version property of class QrParameters passing a value from the QRVersion enum, i.e. from VERSION_01 to VERSION_40 for QR Code or from VERSION_M1 to VERSION_M4 for Micro QR Code. The following barcode images are intended to explain how to create QR Code barcodes using manual settings to define the requested version.

Version	QR Code VERSION_05	Micro QR VERSION_M4

Encoding Modes

Aspose.BarCode for Python via .NET enables the variety of widely used data encoding specifications, such as Unicode and others. Developers can select the desired encoding mode using the qr_encode_mode property of class QrParameters passing a value from the QrEncodeMode enum that includes the following options:

AUTO: information inputted using the code_text property gets encoded with the value set in the code_text_encoding property (UTF8 is applied by default).
BYTES: is intended to encode byte streams and allows encoding digits from 0 to 255. In cases when a byte stream includes digits larger than 255, the library applies the UTF16LE.
UTF_8_BOM and UTF_16_BEBOM: allow encoding barcode data in UTF8 and UTF16BE encodings. The first character is encoded as a byte order mark (BOM) character to denote the enabled encoding. However, the ECI_ENCODING mode is recommended for use because it is more suitable to set the encodings suitable for the QR Code standard.
ECI_ENCODING: applies encodings from the list defined in the ECIEncodings enum.
EXTENDED_CODETEXT: in addition to the main information, barcode data must include special control words that are required to establish improved controls over the data encoding process; in this mode, textual parts with various encodings can be stored in one QR Code barcode.

AUTO Mode

To encode input data when the AUTO encoding mode is enabled, the library applies the encoding defined in the code_text_encoding property. If the required encoding is not specified explicitly, UTF8 is applied.

BYTES Mode

When the BYTES encoding mode is used, input information presented in a form of a plain byte stream is transformed into an array of symbols and then to a string. Digits from 0 to 255 can be encoded. If a byte stream contains digits larger than 255, this symbol gets encoded as two bytes in the UTF16LE encoding (the lower byte is put first).

UTF_8_BOM and UTF_16_BEBOM Modes

The library provides two special encoding modes called UTF_8_BOM and UTF_16_BEBOM, which serve to encode information according to UTF8 and UTF16BE specifications. A byte order mark (BOM) symbol is added as the first digit. The following code sample shows how to enable with the UTF_16_BEBOM encoding mode.

ECI_ENCODING Mode

The ECI_ENCODING encoding mode suggests applying one of the encodings listed in the ECIEncodings enum. Aspose.BarCode for Python via .NET supports the variety of widely used encodings. In this mode, the extended channel interpretation (ECI) identifier is added to denote the enabled encoding to transfer the information about it to decoders. It is recommended to use the UTF8 value.

EXTENDED_CODETEXT Mode

Aspose.BarCode for Python via .NET supports the EXTENDED_CODETEXT mode that allows customizing settings for the QR Code generation process manually. This mode enables activating the multi-ECI mode and adding FNC characters (special symbols to differentiate between fields in variable-length identifiers) to work with extended textual information. The barcode library provides a class called ExtCodetextBuilder that facilitates working with this encoding mode. When the multi-ECI mode is enabled, barcode information gets processed for all predefined encodings automatically. In all other cases, the encoding defined in the code_text_encoding property is applied.

Error Correction Level

The QR Code group of barcode standards provides four types of Reed-Solomon error correction (EC). The error correction mechanism prescribes storing redundant data to facilitate automatic error detection and correction in the case of barcode image distortions or damages. To recover 1% of corrupted data, 2% redundancy is required.

Following error correction levels are supported for QR Code symbologies.

Error Correction Level	Data Recovery Capacity
Level L	7%
Level M	15%
Level Q	25%
Level H	30%

For all QR Code subtypes with the exception of Micro QR developers can use any error correction level. For Micro QR Code, different subtypes are compatible with specific EC levels only, i.e. M1 enables EC level L; M2 - levels L and M; M3 and M4 - levels L, M, and Q.

Error Correction Level	Level L	Level M	Level Q	Level H

Structured Append Mechanism

QR Code types (except Micro QR) support the possibility to generate composite barcodes using the structured append mechanism. In this mode, the input data can be divided among different QR Code barcodes and then composed into a single image. Aspose.BarCode for Python via .NET does not enable distributing input barcode data across several QR Code barcodes; however, it allows creating a composite QR Code label manually. This can be done using the structured_append property of class QrParameters and class QrStructuredAppendParameters. This class provides the following properties:

total_count - the number of barcodes in a composite QR Code image (can take values from 2 to 16)
sequence_indicator - the sequence number of the current barcode (starting from 0)
parity_byte - a byte that serves as a checksum identifier. In the general case, it is calculated as XOR of all bytes in which UTF16BE symbols are encoded using two bytes

Sample barcode images provided below have been created using the structured append mechanism.

Structured Append Type	First Type	Second Type

Aspect Ratio Settings

Aspect Ratio is the ratio between the height and the width of a barcode. To adjust barcode proportions using the X and Y coordinates in Aspose.BarCode for Python via .NET, it is required to use the aspect_ratio property of class QrParameters. This property is defined as a relative coefficient to the value of XDimension parameter. Generally, the value of AspectRatio should be set to 1. When it is necessary to adjust the proportions of generated QR Code barcodes, the aspect_ratio property can be used. Sample barcode labels shown below have been generated using different aspect ratio settings.

Aspect Ratio	Is Set to 1	Is Set to 2

Special Parameters of 1D Barcode Types Generate PDF417 Barcodes