Tạo hoặc Cập nhật Biểu đồ Bài thuyết trình PowerPoint trên Android
Tổng quan
Bài viết này cung cấp hướng dẫn toàn diện về cách tạo và tùy chỉnh biểu đồ bằng Aspose.Slides cho Android thông qua Java. Bạn sẽ học cách thêm biểu đồ vào một slide bằng mã, điền dữ liệu và áp dụng các tùy chọn định dạng khác nhau để phù hợp với yêu cầu thiết kế cụ thể của bạn. Trong suốt bài viết, các ví dụ mã chi tiết minh họa từng bước, từ việc khởi tạo bản trình bày và đối tượng biểu đồ đến cấu hình series, trục và chú giải. Khi làm theo hướng dẫn này, bạn sẽ nắm vững cách tích hợp việc tạo biểu đồ động vào các ứng dụng Android của mình, đơn giản hoá quá trình tạo các bản trình bày dựa trên dữ liệu.
Tạo biểu đồ
Biểu đồ giúp người dùng nhanh chóng hình dung dữ liệu và rút ra những hiểu biết mà có thể không ngay lập tức rõ ràng từ một bảng hoặc bảng tính.
Tại sao nên tạo biểu đồ?
- tổng hợp, cô đọng hoặc tóm tắt một lượng lớn dữ liệu trên một slide duy nhất trong bản trình bày;
- hiển thị các mẫu và xu hướng trong dữ liệu;
- suy ra hướng và xu hướng của dữ liệu theo thời gian hoặc so với một đơn vị đo cụ thể;
- phát hiện các giá trị ngoại lệ, dị thường, sai lệch, lỗi và dữ liệu vô nghĩa;
- truyền đạt hoặc trình bày dữ liệu phức tạp.
Trong PowerPoint, bạn có thể tạo biểu đồ thông qua chức năng Insert, cung cấp các mẫu để thiết kế nhiều loại biểu đồ. Sử dụng Aspose.Slides, bạn có thể tạo cả biểu đồ thông thường (dựa trên các loại biểu đồ phổ biến) và biểu đồ tùy chỉnh.
Note
Sử dụng enumeration ChartType trong gói com.aspose.slides. Các giá trị trong enumeration này tương ứng với các loại biểu đồ khác nhau.Tạo biểu đồ Cột Nhóm
Ví dụ này sử dụng addChart để tạo một biểu đồ cột nhóm so sánh hai series qua ba danh mục. Các series sử dụng màu nền đỏ và xanh lá, và các nhãn riêng lẻ hiển thị tên danh mục, tên series và giá trị. Chỉ mục worksheet 0 tham chiếu tới sheet đầu tiên trong workbook biểu đồ nhúng.
import com.aspose.slides.*;
import android.graphics.Color;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.ClusteredColumn, 20, 20, 500, 300);
chart.getChartTitle().addTextFrameForOverriding("Sample Title");
chart.getChartTitle().getTextFrameForOverriding().getTextFrameFormat().setCenterText(NullableBool.True);
chart.getChartTitle().setHeight(20);
chart.setTitle(true);
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
int worksheetIndex = 0;
chart.getChartData().getSeries().clear();
chart.getChartData().getCategories().clear();
IChartDataCell seriesNameCell = workbook.getCell(worksheetIndex, 0, 1, "Series 1");
chart.getChartData().getSeries().add(seriesNameCell, chart.getType());
seriesNameCell = workbook.getCell(worksheetIndex, 0, 2, "Series 2");
chart.getChartData().getSeries().add(seriesNameCell, chart.getType());
IChartDataCell categoryCell = workbook.getCell(worksheetIndex, 1, 0, "Category 1");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(worksheetIndex, 2, 0, "Category 2");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(worksheetIndex, 3, 0, "Category 3");
chart.getChartData().getCategories().add(categoryCell);
IChartSeries series = chart.getChartData().getSeries().get_Item(0);
IChartDataCell valueCell = workbook.getCell(worksheetIndex, 1, 1, 20);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 2, 1, 50);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 3, 1, 30);
series.getDataPoints().addDataPointForBarSeries(valueCell);
series.getFormat().getFill().setFillType(FillType.Solid);
series.getFormat().getFill().getSolidFillColor().setColor(Color.RED);
series = chart.getChartData().getSeries().get_Item(1);
valueCell = workbook.getCell(worksheetIndex, 1, 2, 30);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 2, 2, 10);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 3, 2, 60);
series.getDataPoints().addDataPointForBarSeries(valueCell);
series.getFormat().getFill().setFillType(FillType.Solid);
series.getFormat().getFill().getSolidFillColor().setColor(Color.rgb(0, 128, 0));
IDataLabel label = series.getDataPoints().get_Item(0).getLabel();
label.getDataLabelFormat().setShowCategoryName(true);
label = series.getDataPoints().get_Item(1).getLabel();
label.getDataLabelFormat().setShowSeriesName(true);
label = series.getDataPoints().get_Item(2).getLabel();
label.getDataLabelFormat().setShowValue(true);
label.getDataLabelFormat().setShowSeriesName(true);
label.getDataLabelFormat().setSeparator("/");
presentation.save("AsposeChart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả:

Tạo biểu đồ Phân tán
Biểu đồ phân tán (còn được gọi là scatter plot hoặc đồ thị x‑y) thường được sử dụng để kiểm tra các mẫu hoặc minh họa mối tương quan giữa hai biến.
Sử dụng biểu đồ phân tán khi:
- Bạn có dữ liệu số cặp đôi.
- Bạn có hai biến phù hợp với nhau.
- Bạn muốn xác định xem hai biến có liên quan hay không.
- Bạn có một biến độc lập có nhiều giá trị cho một biến phụ thuộc.
Ví dụ này vẽ hai bộ giá trị x‑y. Series đầu tiên sử dụng đường thẳng với dấu sao, trong khi series thứ hai sử dụng đường cong mượt với dấu vòng tròn; cả hai đều sử dụng kích thước dấu chấm 10, được cấu hình bằng setSize. Phương thức setSymbol kiểm soát hình dạng dấu.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.ScatterWithSmoothLines, 20, 20, 500, 300);
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
int worksheetIndex = 0;
chart.getChartData().getSeries().clear();
IChartDataCell seriesNameCell = workbook.getCell(worksheetIndex, 1, 1, "Series 1");
chart.getChartData().getSeries().add(seriesNameCell, chart.getType());
seriesNameCell = workbook.getCell(worksheetIndex, 1, 3, "Series 2");
chart.getChartData().getSeries().add(seriesNameCell, chart.getType());
IChartSeries series = chart.getChartData().getSeries().get_Item(0);
IChartDataCell xValueCell = workbook.getCell(worksheetIndex, 2, 1, 1);
IChartDataCell yValueCell = workbook.getCell(worksheetIndex, 2, 2, 3);
series.getDataPoints().addDataPointForScatterSeries(xValueCell, yValueCell);
xValueCell = workbook.getCell(worksheetIndex, 3, 1, 2);
yValueCell = workbook.getCell(worksheetIndex, 3, 2, 10);
series.getDataPoints().addDataPointForScatterSeries(xValueCell, yValueCell);
series.setType(ChartType.ScatterWithStraightLinesAndMarkers);
series.getMarker().setSize(10);
series.getMarker().setSymbol(MarkerStyleType.Star);
series = chart.getChartData().getSeries().get_Item(1);
xValueCell = workbook.getCell(worksheetIndex, 2, 3, 5);
yValueCell = workbook.getCell(worksheetIndex, 2, 4, 2);
series.getDataPoints().addDataPointForScatterSeries(xValueCell, yValueCell);
xValueCell = workbook.getCell(worksheetIndex, 3, 3, 3);
yValueCell = workbook.getCell(worksheetIndex, 3, 4, 1);
series.getDataPoints().addDataPointForScatterSeries(xValueCell, yValueCell);
xValueCell = workbook.getCell(worksheetIndex, 4, 3, 2);
yValueCell = workbook.getCell(worksheetIndex, 4, 4, 2);
series.getDataPoints().addDataPointForScatterSeries(xValueCell, yValueCell);
xValueCell = workbook.getCell(worksheetIndex, 5, 3, 5);
yValueCell = workbook.getCell(worksheetIndex, 5, 4, 1);
series.getDataPoints().addDataPointForScatterSeries(xValueCell, yValueCell);
series.getMarker().setSize(10);
series.getMarker().setSymbol(MarkerStyleType.Circle);
presentation.save("AsposeChart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả:

Tạo biểu đồ Tròn
Biểu đồ tròn phù hợp để hiển thị mối quan hệ phần‑trên‑toàn trong dữ liệu, đặc biệt khi dữ liệu có nhãn phân loại với các giá trị số. Tuy nhiên, nếu dữ liệu của bạn có quá nhiều phần hoặc nhãn, bạn có thể cân nhắc sử dụng biểu đồ cột thay thế.
Ví dụ này tạo một biểu đồ tròn với ba giá trị theo quý. Mỗi miếng bánh có màu nền và viền tùy chỉnh, và các nhãn hiển thị các kết hợp khác nhau của giá trị, phần trăm và thông tin series. Phương thức setFirstSliceAngle đặt miếng bánh đầu tiên bắt đầu ở 180 độ.
import com.aspose.slides.*;
import android.graphics.Color;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.Pie, 20, 20, 500, 300);
chart.getChartTitle().addTextFrameForOverriding("Sample Title");
chart.getChartTitle().getTextFrameForOverriding().getTextFrameFormat().setCenterText(NullableBool.True);
chart.getChartTitle().setHeight(20);
chart.setTitle(true);
chart.getChartData().getSeries().get_Item(0).getLabels().getDefaultDataLabelFormat().setShowValue(true);
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
int worksheetIndex = 0;
chart.getChartData().getSeries().clear();
chart.getChartData().getCategories().clear();
IChartDataCell categoryCell = workbook.getCell(0, 1, 0, "1st Qtr");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, 2, 0, "2nd Qtr");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, 3, 0, "3rd Qtr");
chart.getChartData().getCategories().add(categoryCell);
IChartDataCell seriesNameCell = workbook.getCell(0, 0, 1, "Series 1");
IChartSeries series = chart.getChartData().getSeries().add(seriesNameCell, chart.getType());
IChartDataCell valueCell = workbook.getCell(worksheetIndex, 1, 1, 20);
series.getDataPoints().addDataPointForPieSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 2, 1, 50);
series.getDataPoints().addDataPointForPieSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 3, 1, 30);
series.getDataPoints().addDataPointForPieSeries(valueCell);
chart.getChartData().getSeriesGroups().get_Item(0).setColorVaried(true);
IChartDataPoint firstSlice = series.getDataPoints().get_Item(0);
firstSlice.getFormat().getFill().setFillType(FillType.Solid);
firstSlice.getFormat().getFill().getSolidFillColor().setColor(Color.CYAN);
firstSlice.getFormat().getLine().getFillFormat().setFillType(FillType.Solid);
firstSlice.getFormat().getLine().getFillFormat().getSolidFillColor().setColor(Color.rgb(128, 128, 128));
firstSlice.getFormat().getLine().setWidth(3.0);
firstSlice.getFormat().getLine().setStyle(LineStyle.ThinThick);
firstSlice.getFormat().getLine().setDashStyle(LineDashStyle.LargeDash);
IChartDataPoint secondSlice = series.getDataPoints().get_Item(1);
secondSlice.getFormat().getFill().setFillType(FillType.Solid);
secondSlice.getFormat().getFill().getSolidFillColor().setColor(Color.rgb(165, 42, 42));
secondSlice.getFormat().getLine().getFillFormat().setFillType(FillType.Solid);
secondSlice.getFormat().getLine().getFillFormat().getSolidFillColor().setColor(Color.BLUE);
secondSlice.getFormat().getLine().setWidth(3.0);
secondSlice.getFormat().getLine().setStyle(LineStyle.Single);
secondSlice.getFormat().getLine().setDashStyle(LineDashStyle.LargeDashDot);
IChartDataPoint thirdSlice = series.getDataPoints().get_Item(2);
thirdSlice.getFormat().getFill().setFillType(FillType.Solid);
thirdSlice.getFormat().getFill().getSolidFillColor().setColor(Color.rgb(255, 127, 80));
thirdSlice.getFormat().getLine().getFillFormat().setFillType(FillType.Solid);
thirdSlice.getFormat().getLine().getFillFormat().getSolidFillColor().setColor(Color.RED);
thirdSlice.getFormat().getLine().setWidth(2.0);
thirdSlice.getFormat().getLine().setStyle(LineStyle.ThinThin);
thirdSlice.getFormat().getLine().setDashStyle(LineDashStyle.LargeDashDotDot);
IDataLabel firstLabel = series.getDataPoints().get_Item(0).getLabel();
firstLabel.getDataLabelFormat().setShowValue(true);
IDataLabel secondLabel = series.getDataPoints().get_Item(1).getLabel();
secondLabel.getDataLabelFormat().setShowValue(true);
secondLabel.getDataLabelFormat().setShowLegendKey(true);
secondLabel.getDataLabelFormat().setShowPercentage(true);
IDataLabel thirdLabel = series.getDataPoints().get_Item(2).getLabel();
thirdLabel.getDataLabelFormat().setShowSeriesName(true);
thirdLabel.getDataLabelFormat().setShowPercentage(true);
series.getLabels().getDefaultDataLabelFormat().setShowLeaderLines(true);
chart.getChartData().getSeriesGroups().get_Item(0).setFirstSliceAngle(180);
presentation.save("PieChart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả:

Để cải thiện khả năng đọc của các nhãn ngoài vòng tròn, xem Format Leader Lines để biết ví dụ đặt vị trí nhãn và tùy chỉnh màu, độ rộng, độ trong suốt và kiểu gạch của các đường.
Tạo biểu đồ Đường
Biểu đồ đường (còn gọi là line graph) thích hợp trong các tình huống bạn muốn minh họa sự thay đổi giá trị theo thời gian. Bằng biểu đồ đường, bạn có thể so sánh một lượng lớn dữ liệu đồng thời, theo dõi các thay đổi và xu hướng theo thời gian, làm nổi bật các bất thường trong series dữ liệu, và hơn thế nữa.
Ví dụ này sử dụng addChart để tạo một biểu đồ đường với series và danh mục mặc định, sau đó lưu bản trình bày dưới dạng PPTX.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart lineChart = slide.getShapes().addChart(ChartType.Line, 20, 20, 500, 300);
presentation.save("lineChart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Mặc định, các điểm trên biểu đồ đường được nối bằng các đường thẳng liên tục. Nếu bạn muốn các điểm được nối bằng các gạch chia, gọi setDashStyle với giá trị từ LineDashStyle:
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart lineChart = slide.getShapes().addChart(ChartType.Line, 20, 20, 500, 300);
for (IChartSeries series : lineChart.getChartData().getSeries())
{
series.getFormat().getLine().setDashStyle(LineDashStyle.Dash);
}
}
finally
{
presentation.dispose();
}
Kết quả:

Tạo biểu đồ Cây
Biểu đồ cây (Tree map) thích hợp cho dữ liệu bán hàng khi bạn muốn hiển thị kích thước tương đối của các danh mục và nhanh chóng thu hút sự chú ý đến các mục đóng góp lớn trong mỗi danh mục.
Ví dụ này tạo một biểu đồ cây với tám lá được nhóm thành bốn nhánh và hai nhánh phụ. Phương thức setGroupingItem chỉ định các nhánh ở mức nhóm 1 và các nhánh phụ ở mức 2. Giá trị xác định kích thước hình chữ nhật tương đối, trong khi nhãn danh mục và nhãn cha chồng lên nhau xác định thứ tự phân cấp.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.Treemap, 20, 20, 500, 300);
chart.getChartData().getCategories().clear();
chart.getChartData().getSeries().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
workbook.clear(0);
// Nhánh 1
IChartDataCell categoryCell = workbook.getCell(0, "C1", "Leaf1");
IChartCategory leaf = chart.getChartData().getCategories().add(categoryCell);
leaf.getGroupingLevels().setGroupingItem(1, "Stem1");
leaf.getGroupingLevels().setGroupingItem(2, "Branch1");
categoryCell = workbook.getCell(0, "C2", "Leaf2");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "C3", "Leaf3");
leaf = chart.getChartData().getCategories().add(categoryCell);
leaf.getGroupingLevels().setGroupingItem(1, "Stem2");
categoryCell = workbook.getCell(0, "C4", "Leaf4");
chart.getChartData().getCategories().add(categoryCell);
// Nhánh 2
categoryCell = workbook.getCell(0, "C5", "Leaf5");
leaf = chart.getChartData().getCategories().add(categoryCell);
leaf.getGroupingLevels().setGroupingItem(1, "Stem3");
leaf.getGroupingLevels().setGroupingItem(2, "Branch2");
categoryCell = workbook.getCell(0, "C6", "Leaf6");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "C7", "Leaf7");
leaf = chart.getChartData().getCategories().add(categoryCell);
leaf.getGroupingLevels().setGroupingItem(1, "Stem4");
categoryCell = workbook.getCell(0, "C8", "Leaf8");
chart.getChartData().getCategories().add(categoryCell);
IChartSeries series = chart.getChartData().getSeries().add(ChartType.Treemap);
series.getLabels().getDefaultDataLabelFormat().setShowCategoryName(true);
IChartDataCell valueCell = workbook.getCell(0, "D1", 4);
series.getDataPoints().addDataPointForTreemapSeries(valueCell);
valueCell = workbook.getCell(0, "D2", 5);
series.getDataPoints().addDataPointForTreemapSeries(valueCell);
valueCell = workbook.getCell(0, "D3", 3);
series.getDataPoints().addDataPointForTreemapSeries(valueCell);
valueCell = workbook.getCell(0, "D4", 6);
series.getDataPoints().addDataPointForTreemapSeries(valueCell);
valueCell = workbook.getCell(0, "D5", 9);
series.getDataPoints().addDataPointForTreemapSeries(valueCell);
valueCell = workbook.getCell(0, "D6", 9);
series.getDataPoints().addDataPointForTreemapSeries(valueCell);
valueCell = workbook.getCell(0, "D7", 4);
series.getDataPoints().addDataPointForTreemapSeries(valueCell);
valueCell = workbook.getCell(0, "D8", 3);
series.getDataPoints().addDataPointForTreemapSeries(valueCell);
series.setParentLabelLayout(ParentLabelLayoutType.Overlapping);
presentation.save("Treemap.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả:

Tạo biểu đồ Thác nước
Biểu đồ thác nước cho thấy cách các thay đổi dương và âm đóng góp vào giá trị cuối cùng. Ví dụ, một phân tích lợi nhuận có thể bắt đầu bằng doanh thu, trừ chi phí, và cộng thêm thu nhập khác. Các cột thay đổi nổi giữa giá trị chạy trước và sau, trong khi các cột tổng mở rộng từ 0 tới giá trị tích lũy.
Bảng dưới đây sử dụng các khoản tiền tính bằng nghìn đô la Mỹ:
| Thể loại | Giá trị trong workbook | Loại cột |
|---|---|---|
| Doanh thu | 1000 | Tăng |
| Giá vốn bán hàng | -400 | Giảm |
| Lợi nhuận gộp | 600 | Tổng trung gian |
| Chi phí hoạt động | -200 | Giảm |
| Thu nhập khác | 50 | Tăng |
| Lợi nhuận ròng | 450 | Tổng cuối cùng |
Để đánh dấu một điểm là tổng trung gian hoặc tổng cuối cùng, gọi phương thức setSetAsTotal của điểm đó với true. Cung cấp số tiền tích lũy thực tế trong ô workbook của điểm: 600 cho lợi nhuận gộp (1000 - 400) và 450 cho lợi nhuận ròng (600 - 200 + 50). Phương thức chỉ đánh dấu cột là tổng; nó không tính toán hoặc điền giá trị ô. Không dùng 0 làm chỗ giữ chỗ và không cung cấp thay đổi khác cho điểm tổng. Cột tổng hiển thị giá trị tích lũy mà không cộng lại vào giá trị chạy.
Ví dụ Java đầy đủ này tạo biểu đồ bằng thành viên Waterfall của ChartType, xóa dữ liệu mặc định và điền workbook nhúng. Chỉ mục worksheet 0 chọn sheet đầu tiên; cột A chứa tên danh mục và cột B chứa giá trị. Mỗi ô giá trị được thêm bằng addDataPointForWaterfallSeries. Các chỉ mục điểm dựa trên zero 2 và 5 xác định các tổng trung gian và cuối cùng. Gọi setShowValue với true để hiển thị số trên cột. Không cần bản trình bày hoặc workbook đầu vào.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.Waterfall, 20, 20, 680, 200);
chart.setTitle(true);
chart.getChartTitle().addTextFrameForOverriding("Profit breakdown (USD thousands)");
chart.getChartTitle().setOverlay(false);
chart.setLegend(false);
chart.getChartData().getSeries().clear();
chart.getChartData().getCategories().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
int worksheetIndex = 0;
workbook.clear(worksheetIndex);
IChartDataCell seriesNameCell = workbook.getCell(worksheetIndex, 0, 1, "Profit");
IChartSeries series = chart.getChartData().getSeries().add(seriesNameCell, ChartType.Waterfall);
String[] categories = new String[] { "Revenue", "Cost of sales", "Gross profit", "Operating expenses", "Other income", "Net profit" };
double[] values = new double[] { 1000, -400, 600, -200, 50, 450 };
for (int i = 0; i < categories.length; i++)
{
IChartDataCell categoryCell = workbook.getCell(worksheetIndex, i + 1, 0, categories[i]);
chart.getChartData().getCategories().add(categoryCell);
IChartDataCell valueCell = workbook.getCell(worksheetIndex, i + 1, 1, values[i]);
series.getDataPoints().addDataPointForWaterfallSeries(valueCell);
}
// Các điểm thứ ba và thứ sáu đại diện cho tổng, không phải các thay đổi bổ sung.
series.getDataPoints().get_Item(2).setSetAsTotal(true);
series.getDataPoints().get_Item(5).setSetAsTotal(true);
series.setShowConnectorLines(true);
series.getLabels().getDefaultDataLabelFormat().setShowValue(true);
presentation.save("WaterfallChart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Gọi phương thức mức series setShowConnectorLines với true để hiển thị các đường nối các cột liên tiếp và làm cho giá trị chạy dễ theo dõi hơn. Để ẩn các đường này, thay thế lời gọi phương thức trong ví dụ bằng series.setShowConnectorLines(false); trước khi lưu. Thay đổi này chỉ ảnh hưởng đến hiển thị đường, không thay đổi dữ liệu hay tổng.
Bản trình bày đã lưu hiển thị lợi nhuận gộp 600 và lợi nhuận ròng 450, cả hai tổng được vẽ từ 0:

Tạo biểu đồ Cổ phiếu
Biểu đồ cổ phiếu được dùng để hiển thị dữ liệu tài chính như giá mở cửa, cao, thấp và đóng, hỗ trợ phân tích xu hướng thị trường và biến động. Chúng cung cấp những hiểu biết quan trọng về hiệu suất cổ phiếu, giúp nhà đầu tư và nhà phân tích đưa ra quyết định thông minh.
Ví dụ này tạo một biểu đồ mở‑cao‑thấp‑đóng với bốn series theo thứ tự và ba danh mục. Phương thức setUpDownBars bật các thanh lên/xuống, và getHiLowLinesFormat điều khiển các đường cao‑thấp hiển thị phạm vi giá, trong khi các đường series riêng và các đường lưới ngang phụ bị ẩn.
Trình quản lý trả về bởi getUpDownBars cung cấp các đối tượng định dạng riêng qua getUpBarsFormat và getDownBarsFormat. Sử dụng các phương thức getFill và getLine của mỗi đối tượng để đặt màu nền và viền một cách độc lập. Ví dụ này dùng thanh màu xanh lá với viền xanh lá đậm cho khoảng tăng và thanh màu cam‑đỏ với viền đỏ đậm cho khoảng giảm.
Cung cấp các giá trị số cho cả bốn series tại mỗi danh mục, với Cao và Thấp bao quanh Mở và Đóng. Các thanh so sánh Đóng với Mở trong cùng một danh mục, không phải với danh mục trước: A giảm từ 72 xuống 25, trong khi B tăng từ 25 lên 38 và C tăng từ 38 lên 50. Các giá trị Mở và Đóng bằng nhau không tạo ra khoảng màu nền hiển thị. Thanh lên/xuống bao phủ Mở‑Đóng; đường cao‑thấp bao phủ Thấp‑Cao. Các thanh này thuộc nhóm series và không phải là các series biểu đồ cột thông thường.
Định dạng này cũng hoạt động với các biểu đồ Line và LineWithMarkers có ít nhất hai series trong cùng một nhóm và các giá trị số tương ứng cho mỗi danh mục. Đối với các biểu đồ đường không xếp chồng này, thanh lên/xuống so sánh series đầu và cuối: giá trị cuối cao hơn tạo thanh lên, giá trị cuối thấp hơn tạo thanh xuống. Đảo ngược các series sẽ đảo ngược phân loại. Ví dụ dưới đây sử dụng OpenHighLowClose; không nên cho rằng các biến thể cổ phiếu, line‑stacked hoặc 3D khác sử dụng cùng cách sắp xếp dữ liệu hoặc cách diễn giải khoảng.
import com.aspose.slides.*;
import android.graphics.Color;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.OpenHighLowClose, 20, 20, 500, 150, false);
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
IChartDataCell categoryCell = workbook.getCell(0, 1, 0, "A");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, 2, 0, "B");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, 3, 0, "C");
chart.getChartData().getCategories().add(categoryCell);
IChartDataCell seriesNameCell = workbook.getCell(0, 0, 1, "Open");
chart.getChartData().getSeries().add(seriesNameCell, ChartType.OpenHighLowClose);
seriesNameCell = workbook.getCell(0, 0, 2, "High");
chart.getChartData().getSeries().add(seriesNameCell, ChartType.OpenHighLowClose);
seriesNameCell = workbook.getCell(0, 0, 3, "Low");
chart.getChartData().getSeries().add(seriesNameCell, ChartType.OpenHighLowClose);
seriesNameCell = workbook.getCell(0, 0, 4, "Close");
chart.getChartData().getSeries().add(seriesNameCell, ChartType.OpenHighLowClose);
IChartSeries series = chart.getChartData().getSeries().get_Item(0);
IChartDataCell valueCell = workbook.getCell(0, 1, 1, 72);
series.getDataPoints().addDataPointForStockSeries(valueCell);
valueCell = workbook.getCell(0, 2, 1, 25);
series.getDataPoints().addDataPointForStockSeries(valueCell);
valueCell = workbook.getCell(0, 3, 1, 38);
series.getDataPoints().addDataPointForStockSeries(valueCell);
series = chart.getChartData().getSeries().get_Item(1);
valueCell = workbook.getCell(0, 1, 2, 172);
series.getDataPoints().addDataPointForStockSeries(valueCell);
valueCell = workbook.getCell(0, 2, 2, 57);
series.getDataPoints().addDataPointForStockSeries(valueCell);
valueCell = workbook.getCell(0, 3, 2, 57);
series.getDataPoints().addDataPointForStockSeries(valueCell);
series = chart.getChartData().getSeries().get_Item(2);
valueCell = workbook.getCell(0, 1, 3, 12);
series.getDataPoints().addDataPointForStockSeries(valueCell);
valueCell = workbook.getCell(0, 2, 3, 12);
series.getDataPoints().addDataPointForStockSeries(valueCell);
valueCell = workbook.getCell(0, 3, 3, 13);
series.getDataPoints().addDataPointForStockSeries(valueCell);
series = chart.getChartData().getSeries().get_Item(3);
valueCell = workbook.getCell(0, 1, 4, 25);
series.getDataPoints().addDataPointForStockSeries(valueCell);
valueCell = workbook.getCell(0, 2, 4, 38);
series.getDataPoints().addDataPointForStockSeries(valueCell);
valueCell = workbook.getCell(0, 3, 4, 50);
series.getDataPoints().addDataPointForStockSeries(valueCell);
IUpDownBarsManager upDownBars = chart.getChartData().getSeriesGroups().get_Item(0).getUpDownBars();
upDownBars.setUpDownBars(true);
upDownBars.getUpBarsFormat().getFill().setFillType(FillType.Solid);
upDownBars.getUpBarsFormat().getFill().getSolidFillColor().setColor(Color.rgb(50, 205, 50));
upDownBars.getUpBarsFormat().getLine().getFillFormat().setFillType(FillType.Solid);
upDownBars.getUpBarsFormat().getLine().getFillFormat().getSolidFillColor().setColor(Color.rgb(0, 100, 0));
upDownBars.getUpBarsFormat().getLine().setWidth(2);
upDownBars.getDownBarsFormat().getFill().setFillType(FillType.Solid);
upDownBars.getDownBarsFormat().getFill().getSolidFillColor().setColor(Color.rgb(255, 69, 0));
upDownBars.getDownBarsFormat().getLine().getFillFormat().setFillType(FillType.Solid);
upDownBars.getDownBarsFormat().getLine().getFillFormat().getSolidFillColor().setColor(Color.rgb(139, 0, 0));
upDownBars.getDownBarsFormat().getLine().setWidth(2);
chart.getChartData().getSeriesGroups().get_Item(0).getHiLowLinesFormat().getLine().getFillFormat().setFillType(FillType.Solid);
for (IChartSeries stockSeries : chart.getChartData().getSeries())
{
stockSeries.getFormat().getLine().getFillFormat().setFillType(FillType.NoFill);
}
chart.getAxes().getVerticalAxis().getMinorGridLinesFormat().getLine().getFillFormat().setFillType(FillType.NoFill);
presentation.save("Stock-chart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả, xuất từ PowerPoint:

Tạo biểu đồ Hộp và Râu
Biểu đồ hộp và râu được dùng để hiển thị phân phối dữ liệu bằng cách tóm tắt các chỉ số thống kê chính như trung vị, các phần tư và các điểm ngoại lệ tiềm năng. Chúng rất hữu ích trong phân tích dữ liệu khám phá và các nghiên cứu thống kê để nhanh chóng hiểu biến đổi dữ liệu và xác định bất thường.
Ví dụ này tạo một biểu đồ hộp và râu từ sáu giá trị. Phương thức setQuartileMethod chọn tính toán phần tư độc lập. Ví dụ cũng bật các đường trung bình, dấu trung bình, các điểm nội bộ và các điểm ngoại lệ.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.BoxAndWhisker, 20, 20, 500, 300);
chart.getChartData().getCategories().clear();
chart.getChartData().getSeries().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
workbook.clear(0);
IChartDataCell categoryCell = workbook.getCell(0, "A1", "Category 1");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A2", "Category 2");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A3", "Category 3");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A4", "Category 4");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A5", "Category 5");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A6", "Category 6");
chart.getChartData().getCategories().add(categoryCell);
IChartSeries series = chart.getChartData().getSeries().add(ChartType.BoxAndWhisker);
series.setQuartileMethod(QuartileMethodType.Exclusive);
series.setShowMeanLine(true);
series.setShowMeanMarkers(true);
series.setShowInnerPoints(true);
series.setShowOutlierPoints(true);
IChartDataCell valueCell = workbook.getCell(0, "B1", 15);
series.getDataPoints().addDataPointForBoxAndWhiskerSeries(valueCell);
valueCell = workbook.getCell(0, "B2", 41);
series.getDataPoints().addDataPointForBoxAndWhiskerSeries(valueCell);
valueCell = workbook.getCell(0, "B3", 16);
series.getDataPoints().addDataPointForBoxAndWhiskerSeries(valueCell);
valueCell = workbook.getCell(0, "B4", 10);
series.getDataPoints().addDataPointForBoxAndWhiskerSeries(valueCell);
valueCell = workbook.getCell(0, "B5", 23);
series.getDataPoints().addDataPointForBoxAndWhiskerSeries(valueCell);
valueCell = workbook.getCell(0, "B6", 16);
series.getDataPoints().addDataPointForBoxAndWhiskerSeries(valueCell);
presentation.save("BoxAndWhisker.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Tạo biểu đồ Phễu
Biểu đồ phễu được dùng để trực quan hoá các quy trình có các giai đoạn liên tiếp, trong đó khối lượng dữ liệu giảm dần khi tiến từ bước này sang bước tiếp theo. Chúng đặc biệt hữu ích để phân tích tỷ lệ chuyển đổi, xác định các nút thắt và theo dõi hiệu quả của quy trình bán hàng hoặc marketing.
Ví dụ này sử dụng addChart để thêm một biểu đồ phễu vào slide đầu tiên của một bản trình bày hiện có. Nó thay thế dữ liệu mặc định bằng sáu danh mục và các giá trị từ 50 tới 500, sau đó lưu bản trình bày đã cập nhật. Bản trình bày đầu vào phải chứa ít nhất một slide.
import com.aspose.slides.*;
Presentation presentation = new Presentation("test.pptx");
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.Funnel, 50, 50, 500, 400);
chart.getChartData().getCategories().clear();
chart.getChartData().getSeries().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
workbook.clear(0);
IChartDataCell categoryCell = workbook.getCell(0, "A1", "Category 1");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A2", "Category 2");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A3", "Category 3");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A4", "Category 4");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A5", "Category 5");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "A6", "Category 6");
chart.getChartData().getCategories().add(categoryCell);
IChartSeries series = chart.getChartData().getSeries().add(ChartType.Funnel);
IChartDataCell valueCell = workbook.getCell(0, "B1", 50);
series.getDataPoints().addDataPointForFunnelSeries(valueCell);
valueCell = workbook.getCell(0, "B2", 100);
series.getDataPoints().addDataPointForFunnelSeries(valueCell);
valueCell = workbook.getCell(0, "B3", 200);
series.getDataPoints().addDataPointForFunnelSeries(valueCell);
valueCell = workbook.getCell(0, "B4", 300);
series.getDataPoints().addDataPointForFunnelSeries(valueCell);
valueCell = workbook.getCell(0, "B5", 400);
series.getDataPoints().addDataPointForFunnelSeries(valueCell);
valueCell = workbook.getCell(0, "B6", 500);
series.getDataPoints().addDataPointForFunnelSeries(valueCell);
presentation.save("Funnel.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả:

Tạo biểu đồ Mặt trời
Biểu đồ mặt trời được dùng để trực quan hoá dữ liệu phân cấp, hiển thị các mức độ dưới dạng các vòng đồng tâm. Chúng giúp minh họa mối quan hệ phần‑trên‑toàn và phù hợp cho việc biểu diễn các danh mục và danh mục con lồng nhau một cách rõ ràng, gọn gàng.
Ví dụ này tạo một biểu đồ mặt trời với tám lá được nhóm thành bốn nhánh và hai nhánh phụ. Phương thức setGroupingItem chỉ định các nhánh ở mức nhóm 1 và các nhánh phụ ở mức 2. Nhãn danh mục xác định các đoạn, và các giá trị quyết định kích thước tương đối của chúng.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.Sunburst, 20, 20, 500, 300);
chart.getChartData().getCategories().clear();
chart.getChartData().getSeries().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
workbook.clear(0);
// Nhánh 1
IChartDataCell categoryCell = workbook.getCell(0, "C1", "Leaf1");
IChartCategory leaf = chart.getChartData().getCategories().add(categoryCell);
leaf.getGroupingLevels().setGroupingItem(1, "Stem1");
leaf.getGroupingLevels().setGroupingItem(2, "Branch1");
categoryCell = workbook.getCell(0, "C2", "Leaf2");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "C3", "Leaf3");
leaf = chart.getChartData().getCategories().add(categoryCell);
leaf.getGroupingLevels().setGroupingItem(1, "Stem2");
categoryCell = workbook.getCell(0, "C4", "Leaf4");
chart.getChartData().getCategories().add(categoryCell);
// Nhánh 2
categoryCell = workbook.getCell(0, "C5", "Leaf5");
leaf = chart.getChartData().getCategories().add(categoryCell);
leaf.getGroupingLevels().setGroupingItem(1, "Stem3");
leaf.getGroupingLevels().setGroupingItem(2, "Branch2");
categoryCell = workbook.getCell(0, "C6", "Leaf6");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "C7", "Leaf7");
leaf = chart.getChartData().getCategories().add(categoryCell);
leaf.getGroupingLevels().setGroupingItem(1, "Stem4");
categoryCell = workbook.getCell(0, "C8", "Leaf8");
chart.getChartData().getCategories().add(categoryCell);
IChartSeries series = chart.getChartData().getSeries().add(ChartType.Sunburst);
series.getLabels().getDefaultDataLabelFormat().setShowCategoryName(true);
IChartDataCell valueCell = workbook.getCell(0, "D1", 4);
series.getDataPoints().addDataPointForSunburstSeries(valueCell);
valueCell = workbook.getCell(0, "D2", 5);
series.getDataPoints().addDataPointForSunburstSeries(valueCell);
valueCell = workbook.getCell(0, "D3", 3);
series.getDataPoints().addDataPointForSunburstSeries(valueCell);
valueCell = workbook.getCell(0, "D4", 6);
series.getDataPoints().addDataPointForSunburstSeries(valueCell);
valueCell = workbook.getCell(0, "D5", 9);
series.getDataPoints().addDataPointForSunburstSeries(valueCell);
valueCell = workbook.getCell(0, "D6", 9);
series.getDataPoints().addDataPointForSunburstSeries(valueCell);
valueCell = workbook.getCell(0, "D7", 4);
series.getDataPoints().addDataPointForSunburstSeries(valueCell);
valueCell = workbook.getCell(0, "D8", 3);
series.getDataPoints().addDataPointForSunburstSeries(valueCell);
presentation.save("Sunburst.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả:

Tạo biểu đồ Histogram
Biểu đồ histogram cho thấy cách các giá trị số được phân bố qua các khoảng (bins). Đối với các báo cáo hàng tháng về thời gian xử lý đơn hàng, hãy sử dụng cùng độ rộng bin và các ngưỡng để giữ các khoảng nhất quán và làm cho các phân bố dễ so sánh hơn.
Gọi setAggregationType trên trục ngang với một chế độ từ AxisAggregationType. setBinWidth chỉ áp dụng cho ByBinWidth; setNumberOfBins chỉ áp dụng cho ByNumberOfBins. Sử dụng Automatic để để biểu đồ tự quyết định các bin.
Sử dụng độ rộng bin cố định
Ví dụ này nhóm thời gian xử lý thành các khoảng 10 phút, với các bin riêng cho thời gian ≤ 10 phút và > 40 phút. Kích hoạt các bin này bằng setUnderflowBin và setOverflowBin. Khi cung cấp ngưỡng rõ ràng qua setUnderflowBin và setOverflowBin, gọi setAutomaticUnderflowBin và setAutomaticOverflowBin với false.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.Histogram, 20, 20, 680, 200);
chart.setLegend(false);
chart.setTitle(false);
chart.getChartData().getCategories().clear();
chart.getChartData().getSeries().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
workbook.clear(0);
IChartSeries series = chart.getChartData().getSeries().add(ChartType.Histogram);
double[] values = { 5, 10, 10, 11, 15, 20, 20, 21, 25, 30, 30, 31, 35, 40, 40, 41, 50 };
for (int i = 0; i < values.length; i++)
{
IChartDataCell valueCell = workbook.getCell(0, i, 0, values[i]);
series.getDataPoints().addDataPointForHistogramSeries(valueCell);
}
IAxis axis = chart.getAxes().getHorizontalAxis();
axis.setAggregationType(AxisAggregationType.ByBinWidth);
axis.setBinWidth(10);
axis.setUnderflowBin(true);
axis.setAutomaticUnderflowBin(false);
axis.setUnderflowBin(10);
axis.setOverflowBin(true);
axis.setAutomaticOverflowBin(false);
axis.setOverflowBin(40);
presentation.save("Histogram-bin-width.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Bản trình bày trong PowerPoint hiển thị số lượng bin là 3, 4, 4, 4, và 2. Bin underflow bao gồm 5, 10, 10, vì vậy ngưỡng của nó là bao gồm. Bin overflow chỉ bao gồm 41, 50, vì vậy ngưỡng của nó là không bao gồm; các giá trị bằng 40 vẫn nằm trong khoảng trước. Các bin nội bao gồm các giá trị lớn hơn biên dưới và nhỏ hơn hoặc bằng biên trên.

Xác định số bin
Đối với mức chi tiết cố định thay vì các khoảng cố định, yêu cầu năm bin cho cùng dữ liệu. Ví dụ này tắt bin underflow và overflow. Biểu đồ xác định độ rộng dựa trên phạm vi dữ liệu, vì vậy các biên có thể thay đổi giữa các báo cáo.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.Histogram, 20, 20, 680, 200);
chart.setLegend(false);
chart.setTitle(false);
chart.getChartData().getCategories().clear();
chart.getChartData().getSeries().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
workbook.clear(0);
IChartSeries series = chart.getChartData().getSeries().add(ChartType.Histogram);
double[] values = { 5, 10, 10, 11, 15, 20, 20, 21, 25, 30, 30, 31, 35, 40, 40, 41, 50 };
for (int i = 0; i < values.length; i++)
{
IChartDataCell valueCell = workbook.getCell(0, i, 0, values[i]);
series.getDataPoints().addDataPointForHistogramSeries(valueCell);
}
IAxis axis = chart.getAxes().getHorizontalAxis();
axis.setAggregationType(AxisAggregationType.ByNumberOfBins);
axis.setNumberOfBins(5);
presentation.save("Histogram-bin-count.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Năm bin có số lượng 4, 4, 4, 4, và 1. So sánh phân bố này với kết quả độ rộng cố định ở trên: các giá trị đầu vào giống nhau, nhưng các biên khác nhau.

Tạo biểu đồ Radar
Biểu đồ radar được dùng để hiển thị dữ liệu đa biến trong định dạng hai chiều, cho phép so sánh dễ dàng nhiều biến cùng lúc. Chúng đặc biệt hữu ích để xác định các mẫu, điểm mạnh và điểm yếu trên nhiều chỉ số hiệu suất hoặc thuộc tính.
Ví dụ này sử dụng addChart để tạo một biểu đồ radar với series và danh mục mặc định, sau đó lưu bản trình bày dưới dạng PPTX.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
slide.getShapes().addChart(ChartType.Radar, 20, 20, 500, 300);
presentation.save("Radar-chart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả:

Tạo biểu đồ Đa‑danh mục
Biểu đồ đa‑danh mục được dùng để hiển thị dữ liệu có nhiều nhóm danh mục, cho phép bạn so sánh giá trị qua nhiều chiều đồng thời. Chúng đặc biệt hữu ích khi cần phân tích xu hướng và mối quan hệ trong các bộ dữ liệu phức tạp, đa lớp.
Ví dụ này tạo một biểu đồ cột nhóm với tám danh mục sắp xếp thành bốn cặp. Phương thức setGroupingItem gán mỗi cặp một nhãn chung ở mức nhóm 1, tạo ra trục danh mục có cả nhãn riêng lẻ và nhãn nhóm.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.ClusteredColumn, 20, 20, 500, 300);
chart.getChartData().getSeries().clear();
chart.getChartData().getCategories().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
workbook.clear(0);
int worksheetIndex = 0;
IChartDataCell categoryCell = workbook.getCell(0, "c2", "A");
IChartCategory category = chart.getChartData().getCategories().add(categoryCell);
category.getGroupingLevels().setGroupingItem(1, "Group1");
categoryCell = workbook.getCell(0, "c3", "B");
category = chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "c4", "C");
category = chart.getChartData().getCategories().add(categoryCell);
category.getGroupingLevels().setGroupingItem(1, "Group2");
categoryCell = workbook.getCell(0, "c5", "D");
category = chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "c6", "E");
category = chart.getChartData().getCategories().add(categoryCell);
category.getGroupingLevels().setGroupingItem(1, "Group3");
categoryCell = workbook.getCell(0, "c7", "F");
category = chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(0, "c8", "G");
category = chart.getChartData().getCategories().add(categoryCell);
category.getGroupingLevels().setGroupingItem(1, "Group4");
categoryCell = workbook.getCell(0, "c9", "H");
category = chart.getChartData().getCategories().add(categoryCell);
IChartDataCell seriesNameCell = workbook.getCell(0, "D1", "Series 1");
IChartSeries series = chart.getChartData().getSeries().add(seriesNameCell, ChartType.ClusteredColumn);
IChartDataCell valueCell = workbook.getCell(worksheetIndex, "D2", 10);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, "D3", 20);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, "D4", 30);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, "D5", 40);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, "D6", 50);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, "D7", 60);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, "D8", 70);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, "D9", 80);
series.getDataPoints().addDataPointForBarSeries(valueCell);
presentation.save("AsposeChart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả:

Xóa nhãn Quý
Tải xuống quarters.pptx và đặt nó trong thư mục làm việc. Biểu đồ trong file này hiển thị chín tháng và một series bán hàng với các giá trị từ 10 đến 18. Trên trục danh mục, Q1 bao gồm tháng 1‑3, Q2 bao gồm tháng 4‑6, và Q3 bao gồm tháng 7‑9.
Tháng 4 là danh mục thứ tư (chỉ mục 3) và chứa nhãn Q2. Sử dụng getGroupingLevels để truy cập các mức nhóm của tháng 4, sau đó gọi deleteGroupingItem với mức 1 để xóa nhãn quý. Mức 0 đại diện cho tháng và không thể xóa bằng phương thức này.
import com.aspose.slides.*;
import java.util.ArrayList;
import java.util.List;
import android.text.TextUtils;
Presentation presentation = new Presentation("quarters.pptx");
try {
IChart chart = (IChart) presentation.getSlides().get_Item(0).getShapes().get_Item(0);
IChartCategory april = chart.getChartData().getCategories().get_Item(3);
april.getGroupingLevels().deleteGroupingItem(1);
presentation.save("quarters-updated.pptx", SaveFormat.Pptx);
} finally {
presentation.dispose();
}
Presentation reopened = new Presentation("quarters-updated.pptx");
try {
IChart updatedChart = (IChart) reopened.getSlides().get_Item(0).getShapes().get_Item(0);
IChartData data = updatedChart.getChartData();
List<String> months = new ArrayList<>();
for (IChartCategory month : data.getCategories()) {
months.add(String.valueOf(month.getAsCell().getValue()));
}
List<String> sales = new ArrayList<>();
for (IChartDataPoint point : data.getSeries().get_Item(0).getDataPoints()) {
sales.add(String.valueOf(point.getValue().getData()));
}
System.out.println(TextUtils.join(", ", months));
System.out.println(TextUtils.join(", ", sales));
} finally {
reopened.dispose();
}
Sau khi mở lại biểu đồ, ví dụ in ra các tháng gốc (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep) và các giá trị bán hàng (10, 11, 12, 13, 14, 15, 16, 17, 18) theo cùng thứ tự. Mở quarters-updated.pptx trong PowerPoint để so sánh các nhãn trục. Nhãn Q2 và ranh giới nhóm trước tháng 4 biến mất, vì vậy Q1 bao phủ tháng 1‑6. Q3 vẫn bắt đầu từ tháng 7.

Tạo biểu đồ Bản đồ
Biểu đồ bản đồ được dùng để trực quan hoá dữ liệu địa lý bằng cách gán thông tin tới các vị trí cụ thể như quốc gia, tiểu bang hoặc thành phố. Chúng rất hữu ích cho việc phân tích xu hướng khu vực, dữ liệu nhân khẩu và phân bố không gian một cách rõ ràng, hấp dẫn.
Ví dụ này sử dụng addChart để tạo một biểu đồ bản đồ với dữ liệu địa lý mặc định và lưu lại để xem trong PowerPoint.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.Map, 20, 20, 500, 300);
presentation.save("mapChart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Kết quả:

Note
Hình ảnh trên hiển thị bản trình bày đã lưu mở trong PowerPoint. Aspose.Slides ghi đúng biểu đồ bản đồ và dữ liệu của nó, nhưng không tự vẽ biểu đồ bản đồ: khi một slide chứa biểu đồ này được render thành ảnh hoặc chuyển đổi sang PDF hoặc SVG, vùng biểu đồ sẽ trống. Các hình khác trên cùng slide không bị ảnh hưởng.Tạo biểu đồ Kết hợp
Biểu đồ kết hợp (hoặc combo chart) kết hợp hai hoặc nhiều loại biểu đồ trong một đồ thị. Biểu đồ này cho phép bạn làm nổi bật, so sánh hoặc xem xét sự khác biệt giữa hai hoặc nhiều bộ dữ liệu, giúp xác định mối quan hệ giữa chúng.

Ví dụ này kết hợp hai series cột nhóm với một series đường qua bốn danh mục. Các cột sử dụng trục tung chính, trong khi setPlotOnSecondAxis đặt đường trên trục tung phụ ở bên phải. Các hàm trợ giúp cấu hình tiêu đề, chú giải, nhãn trục và lưới.
import com.aspose.slides.*;
import android.graphics.Color;
class ComboChartExample
{
void createComboChart()
{
Presentation presentation = new Presentation();
try
{
IChart chart = createChartWithFirstSeries(presentation.getSlides().get_Item(0));
addSecondSeriesToChart(chart);
addThirdSeriesToChart(chart);
setPrimaryAxesFormat(chart);
setSecondaryAxesFormat(chart);
presentation.save("combo-chart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
}
IChart createChartWithFirstSeries(ISlide slide)
{
IChart chart = slide.getShapes().addChart(ChartType.ClusteredColumn, 50, 50, 600, 400);
chart.setTitle(true);
chart.getChartTitle().addTextFrameForOverriding("Chart Title");
chart.getChartTitle().setOverlay(false);
IPortionFormat portionFormat = chart.getChartTitle().getTextFrameForOverriding().getParagraphs().get_Item(0).getParagraphFormat().getDefaultPortionFormat();
portionFormat.setFontBold(NullableBool.False);
portionFormat.setFontHeight(18f);
chart.getLegend().setPosition(LegendPositionType.Bottom);
chart.getLegend().getTextFormat().getPortionFormat().setFontHeight(12f);
chart.getChartData().getSeries().clear();
chart.getChartData().getCategories().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
int worksheetIndex = 0;
IChartDataCell categoryCell = workbook.getCell(worksheetIndex, 1, 0, "Category 1");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(worksheetIndex, 2, 0, "Category 2");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(worksheetIndex, 3, 0, "Category 3");
chart.getChartData().getCategories().add(categoryCell);
categoryCell = workbook.getCell(worksheetIndex, 4, 0, "Category 4");
chart.getChartData().getCategories().add(categoryCell);
IChartDataCell seriesNameCell = workbook.getCell(worksheetIndex, 0, 1, "Series 1");
IChartSeries series = chart.getChartData().getSeries().add(seriesNameCell, chart.getType());
series.getParentSeriesGroup().setOverlap((byte) -25);
series.getParentSeriesGroup().setGapWidth(220);
IChartDataCell valueCell = workbook.getCell(worksheetIndex, 1, 1, 4.3);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 2, 1, 2.5);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 3, 1, 3.5);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 4, 1, 4.5);
series.getDataPoints().addDataPointForBarSeries(valueCell);
return chart;
}
void addSecondSeriesToChart(IChart chart)
{
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
final int worksheetIndex = 0;
IChartDataCell seriesNameCell = workbook.getCell(worksheetIndex, 0, 2, "Series 2");
IChartSeries series = chart.getChartData().getSeries().add(seriesNameCell, ChartType.ClusteredColumn);
series.getParentSeriesGroup().setOverlap((byte) -25);
series.getParentSeriesGroup().setGapWidth(220);
IChartDataCell valueCell = workbook.getCell(worksheetIndex, 1, 2, 2.4);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 2, 2, 4.4);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 3, 2, 1.8);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 4, 2, 2.8);
series.getDataPoints().addDataPointForBarSeries(valueCell);
}
void addThirdSeriesToChart(IChart chart)
{
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
final int worksheetIndex = 0;
IChartDataCell seriesNameCell = workbook.getCell(worksheetIndex, 0, 3, "Series 3");
IChartSeries series = chart.getChartData().getSeries().add(seriesNameCell, ChartType.Line);
IChartDataCell valueCell = workbook.getCell(worksheetIndex, 1, 3, 2.0);
series.getDataPoints().addDataPointForLineSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 2, 3, 2.0);
series.getDataPoints().addDataPointForLineSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 3, 3, 3.0);
series.getDataPoints().addDataPointForLineSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 4, 3, 5.0);
series.getDataPoints().addDataPointForLineSeries(valueCell);
series.setPlotOnSecondAxis(true);
}
void setPrimaryAxesFormat(IChart chart)
{
IAxis horizontalAxis = chart.getAxes().getHorizontalAxis();
horizontalAxis.getTextFormat().getPortionFormat().setFontHeight(12f);
horizontalAxis.getFormat().getLine().getFillFormat().setFillType(FillType.NoFill);
setAxisTitle(horizontalAxis, "X Axis");
IAxis verticalAxis = chart.getAxes().getVerticalAxis();
verticalAxis.getTextFormat().getPortionFormat().setFontHeight(12f);
verticalAxis.getFormat().getLine().getFillFormat().setFillType(FillType.NoFill);
setAxisTitle(verticalAxis, "Y Axis 1");
ILineFillFormat majorGridLinesFormat = verticalAxis.getMajorGridLinesFormat().getLine().getFillFormat();
majorGridLinesFormat.setFillType(FillType.Solid);
majorGridLinesFormat.getSolidFillColor().setColor(Color.rgb(217, 217, 217));
}
void setSecondaryAxesFormat(IChart chart)
{
IAxis secondaryHorizontalAxis = chart.getAxes().getSecondaryHorizontalAxis();
secondaryHorizontalAxis.setPosition(AxisPositionType.Bottom);
secondaryHorizontalAxis.setCrossType(CrossesType.Maximum);
secondaryHorizontalAxis.setVisible(false);
secondaryHorizontalAxis.getMajorGridLinesFormat().getLine().getFillFormat().setFillType(FillType.NoFill);
secondaryHorizontalAxis.getMinorGridLinesFormat().getLine().getFillFormat().setFillType(FillType.NoFill);
IAxis secondaryVerticalAxis = chart.getAxes().getSecondaryVerticalAxis();
secondaryVerticalAxis.setPosition(AxisPositionType.Right);
secondaryVerticalAxis.getTextFormat().getPortionFormat().setFontHeight(12f);
secondaryVerticalAxis.getFormat().getLine().getFillFormat().setFillType(FillType.NoFill);
secondaryVerticalAxis.getMajorGridLinesFormat().getLine().getFillFormat().setFillType(FillType.NoFill);
secondaryVerticalAxis.getMinorGridLinesFormat().getLine().getFillFormat().setFillType(FillType.NoFill);
setAxisTitle(secondaryVerticalAxis, "Y Axis 2");
}
void setAxisTitle(IAxis axis, String axisTitle)
{
axis.setTitle(true);
axis.getTitle().setOverlay(false);
IPortionFormat titlePortionFormat = axis.getTitle().addTextFrameForOverriding(axisTitle).getParagraphs().get_Item(0).getParagraphFormat().getDefaultPortionFormat();
titlePortionFormat.setFontBold(NullableBool.False);
titlePortionFormat.setFontHeight(12f);
}
}
ComboChartExample example = new ComboChartExample();
example.createComboChart();
Cập nhật biểu đồ
Aspose.Slides cho Android thông qua Java cho phép bạn cập nhật các biểu đồ PowerPoint bằng cách sửa đổi dữ liệu, định dạng và kiểu dáng. Tính năng này đơn giản hoá quá trình duy trì bản trình bày luôn cập nhật với nội dung động và đảm bảo biểu đồ phản ánh chính xác dữ liệu và tiêu chuẩn hình ảnh hiện tại.
Ví dụ này cập nhật biểu đồ có tên “My chart” trên slide đầu tiên của một bản trình bày hiện có. Nó yêu cầu hai series cột với ba điểm dữ liệu mỗi series, với nhãn danh mục ở cột A và tên series ở hàng đầu tiên của worksheet đầu tiên. Ví dụ sử dụng getCell để thay đổi các ô workbook, cập nhật giá trị series, thêm một series thứ ba, và đổi loại biểu đồ thành hình trụ nhóm qua setType.
import com.aspose.slides.*;
final String chartName = "My chart";
Presentation presentation = new Presentation("ExistingChart.pptx");
try
{
ISlide slide = presentation.getSlides().get_Item(0);
for (IShape shape : slide.getShapes())
{
if (shape instanceof IChart && chartName.equals(shape.getName()))
{
IChart chart = (IChart) shape;
int worksheetIndex = 0;
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
workbook.getCell(worksheetIndex, 1, 0, "Modified Category 1");
workbook.getCell(worksheetIndex, 2, 0, "Modified Category 2");
IChartSeries series = chart.getChartData().getSeries().get_Item(0);
workbook.getCell(worksheetIndex, 0, 1, "New_Series 1");
series.getDataPoints().get_Item(0).getValue().setData(90);
series.getDataPoints().get_Item(1).getValue().setData(123);
series.getDataPoints().get_Item(2).getValue().setData(44);
series = chart.getChartData().getSeries().get_Item(1);
workbook.getCell(worksheetIndex, 0, 2, "New_Series 2");
series.getDataPoints().get_Item(0).getValue().setData(23);
series.getDataPoints().get_Item(1).getValue().setData(67);
series.getDataPoints().get_Item(2).getValue().setData(99);
IChartDataCell seriesNameCell = workbook.getCell(worksheetIndex, 0, 3, "Series 3");
series = chart.getChartData().getSeries().add(seriesNameCell, chart.getType());
IChartDataCell valueCell = workbook.getCell(worksheetIndex, 1, 3, 20);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 2, 3, 50);
series.getDataPoints().addDataPointForBarSeries(valueCell);
valueCell = workbook.getCell(worksheetIndex, 3, 3, 30);
series.getDataPoints().addDataPointForBarSeries(valueCell);
chart.setType(ChartType.ClusteredCylinder);
}
}
presentation.save("AsposeChartModified.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Đặt phạm vi dữ liệu cho một biểu đồ
Để kiểm tra phạm vi đã được biểu đồ hiện có sử dụng, xem Retrieve a Chart’s Data Range.
Aspose.Slides cho Android thông qua Java cung cấp khả năng định nghĩa một phạm vi dữ liệu cụ thể từ worksheet làm nguồn cho dữ liệu biểu đồ của bạn. Điều này có nghĩa là bạn có thể ánh xạ trực tiếp một phần của worksheet vào biểu đồ, cho phép kiểm soát ô nào đóng góp vào series và danh mục của biểu đồ. Kết quả là, bạn có thể dễ dàng cập nhật và đồng bộ hóa các biểu đồ với những thay đổi dữ liệu mới nhất trong worksheet, đảm bảo các bản trình bày PowerPoint của bạn phản ánh thông tin hiện tại và chính xác.
Ví dụ này sử dụng setRange để đặt nguồn dữ liệu cho biểu đồ có tên “My chart” trên slide đầu tiên của một bản trình bày hiện có thành Sheet1!A1:B4. Workbook biểu đồ phải chứa worksheet đó và một phạm vi đã được điền với tiêu đề series ở hàng đầu, nhãn danh mục ở cột A và ba giá trị trong cột B.
import com.aspose.slides.*;
final String chartName = "My chart";
Presentation presentation = new Presentation("ExistingChart.pptx");
try
{
ISlide slide = presentation.getSlides().get_Item(0);
for (IShape shape : slide.getShapes())
{
if (shape instanceof IChart && chartName.equals(shape.getName()))
{
IChart chart = (IChart) shape;
chart.getChartData().setRange("Sheet1!A1:B4");
}
}
presentation.save("SetDataRange.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Sử dụng các điểm đánh dấu mặc định trong biểu đồ
Khi bạn sử dụng các điểm đánh dấu mặc định trong biểu đồ, mỗi series biểu đồ sẽ tự động nhận một ký hiệu điểm đánh dấu mặc định khác nhau.
Ví dụ này sử dụng addChart để tạo một biểu đồ với hai series đường và một chú giải. Cài đặt dấu được truy cập qua getMarker giữ lại các ký hiệu dấu được gán tự động. Series đầu tiên bao gồm một giá trị âm và một giá trị thiếu, biểu diễn bằng null, trong khi series thứ hai có giá trị cho mọi danh mục.
import com.aspose.slides.*;
Presentation presentation = new Presentation();
try
{
ISlide slide = presentation.getSlides().get_Item(0);
IChart chart = slide.getShapes().addChart(ChartType.LineWithMarkers, 10, 10, 400, 400);
chart.getChartData().getSeries().clear();
chart.getChartData().getCategories().clear();
IChartDataWorkbook workbook = chart.getChartData().getChartDataWorkbook();
IChartDataCell seriesNameCell = workbook.getCell(0, 0, 1, "Series 1");
IChartSeries series = chart.getChartData().getSeries().add(seriesNameCell, chart.getType());
IChartDataCell categoryCell = workbook.getCell(0, 1, 0, "C1");
chart.getChartData().getCategories().add(categoryCell);
IChartDataCell valueCell = workbook.getCell(0, 1, 1, 24);
series.getDataPoints().addDataPointForLineSeries(valueCell);
categoryCell = workbook.getCell(0, 2, 0, "C2");
chart.getChartData().getCategories().add(categoryCell);
valueCell = workbook.getCell(0, 2, 1, 23);
series.getDataPoints().addDataPointForLineSeries(valueCell);
categoryCell = workbook.getCell(0, 3, 0, "C3");
chart.getChartData().getCategories().add(categoryCell);
valueCell = workbook.getCell(0, 3, 1, -10);
series.getDataPoints().addDataPointForLineSeries(valueCell);
categoryCell = workbook.getCell(0, 4, 0, "C4");
chart.getChartData().getCategories().add(categoryCell);
valueCell = workbook.getCell(0, 4, 1, null);
series.getDataPoints().addDataPointForLineSeries(valueCell);
seriesNameCell = workbook.getCell(0, 0, 2, "Series 2");
IChartSeries secondSeries = chart.getChartData().getSeries().add(seriesNameCell, chart.getType());
valueCell = workbook.getCell(0, 1, 2, 30);
secondSeries.getDataPoints().addDataPointForLineSeries(valueCell);
valueCell = workbook.getCell(0, 2, 2, 10);
secondSeries.getDataPoints().addDataPointForLineSeries(valueCell);
valueCell = workbook.getCell(0, 3, 2, 60);
secondSeries.getDataPoints().addDataPointForLineSeries(valueCell);
valueCell = workbook.getCell(0, 4, 2, 40);
secondSeries.getDataPoints().addDataPointForLineSeries(valueCell);
chart.setLegend(true);
chart.getLegend().setOverlay(false);
presentation.save("DefaultMarkersInChart.pptx", SaveFormat.Pptx);
}
finally
{
presentation.dispose();
}
Câu hỏi thường gặp
Các loại biểu đồ nào được hỗ trợ bởi Aspose.Slides cho Android thông qua Java?
Aspose.Slides cho Android thông qua Java hỗ trợ nhiều loại biểu đồ, bao gồm cột, đường, tròn, khu vực, phân tán, histogram, radar và nhiều loại khác. Sự linh hoạt này cho phép bạn chọn loại biểu đồ phù hợp nhất cho nhu cầu trực quan hoá dữ liệu của mình.
Làm sao để thêm một biểu đồ mới vào slide?
Để thêm một biểu đồ, trước tiên bạn tạo một thể hiện của lớp Presentation, lấy slide mong muốn bằng chỉ mục của nó, và sau đó gọi phương thức để thêm biểu đồ, chỉ định loại biểu đồ và dữ liệu ban đầu. Quy trình này tích hợp biểu đồ trực tiếp vào bản trình bày của bạn.
Làm thế nào tôi có thể cập nhật dữ liệu hiển thị trong một biểu đồ?
Bạn có thể cập nhật dữ liệu biểu đồ bằng cách truy cập workbook dữ liệu của nó (IChartDataWorkbook), xóa bất kỳ series và danh mục mặc định nào, sau đó thêm dữ liệu tùy chỉnh của bạn. Điều này cho phép bạn lập trình làm mới biểu đồ để phản ánh dữ liệu mới nhất.
Có thể tùy chỉnh giao diện của biểu đồ không?
Có, Aspose.Slides cho Android thông qua Java cung cấp các tùy chọn tùy chỉnh phong phú. Bạn có thể thay đổi màu sắc, phông chữ, nhãn, chú giải và các yếu tố định dạng khác để điều chỉnh giao diện biểu đồ theo yêu cầu thiết kế cụ thể của bạn.